2.Insert chute control rod into chute control head. Push rod as far into chute control head as possible, keeping the holes in the rod pointing upward. See Figure 3-4.

4.Squeeze the trigger on the joystick and rotate the chute by hand to face forward. The holes in the chute control input will be facing up. See Figure 3-6.

NOTE: The chute will not rotate without squeezing the trigger on the joystick.

Chute Control

Top View

Input

 

 

Figure 3-4

 

 

3.

Place chute onto chute base and ensure chute control

 

Figure 3-6

 

rod is positioned under the handle panel. Install hex bolt

 

 

previously removed but do not secure with wing nut at this

5.

Rotate the joystick to the one o’clock position so that the

 

time. See Figure 3-5.

 

 

silver indicator arrow on the pinion gear below the control

 

 

 

panel faces upward. See Figure 3-7.

Figure 3-5

Figure 3-7

NOTE: The joystick will be angled slightly to the right at the one o’clock position. See “Top View” in Figure 3-6.

8Section 2— Assembly & Set-Up