Self-Tapping

Screw

Belt Cover

Figure 13

Remove the three hex nuts and lock washers which attach the auger housing assembly to the frame assembly on each side. See Figure 14.

Remove Belt

Remove Belt

Idler Pulley

WARNING: Do not attempt to change the

Figure 15

 

auger belt without the help of an assistant.

• While lifting up on the handles, bring the frame

It is very important that one person,

assembly close to the auger housing and place the

standing at the operating position, firmly

two belts on the front and rear engine pulleys. See

hold the snow thrower housing to prevent

Figure 16.

it from tipping while the other person

 

replaces the belt. Failure to comply with

 

this may result in injury.

 

 

Push

 

Frame

 

Assembly

 

Push

 

Auger

 

Assembly

Hex Nuts &

Figure 16

Lock Washers

 

• Level the frame assembly and tip the auger

Figure 14

housing forward to align studs with the

corresponding holes on both sides of the frame

• Standing in the operating position, lift up on the

assembly.

handles and pull the frame assembly rearward. The

NOTE: Use care to avoid pinching the control cable.

frame and the housing will separate and the rear

 

auger belt will come off the pulley. Maintain control

• From the frame assembly side, insert the six lock

of the frame assembly while pulling it.

washers and hex nuts previously removed onto the

• Remove the two belts from the two engine pulleys.

studs. Tighten nuts securely. See Figure 14.

See Figure 15.

• Reinstall the belt cover on the front of the engine

• To remove the front auger drive belt, push the idler

with the two self-tapping screws and flat washers.

pulley to the left. The belt brake should move

NOTE: Make sure that the auger cable is routed in front

outward and lift the front auger drive belt from the

of the belt.

front auger pulley.

 

• Place new belts on the two auger pulleys making

Drive Belt

sure that the front auger belt is under the belt brake.

• Drain the gasoline from the snow thrower or place a

Route belts under and to the left of the flat idler

piece of plastic under the gas cap.

pulley. Hold the belts upward in this position.

 

 

13

Page 13
Image 13
Cub Cadet 826 4x4 manual Drive Belt

826 4x4 specifications

The Cub Cadet 826 4x4 is a powerful and versatile snow blower designed for homeowners who face harsh winter conditions. It combines robust engineering with user-friendly features, making snow removal a more manageable task. This machine is equipped with a 26-inch clearing width, allowing it to tackle significant snow accumulations efficiently.

One of the standout features of the Cub Cadet 826 4x4 is its 4-wheel drive capability. This ensures that users can navigate snowy terrain with ease, providing enhanced traction and stability on slopes and uneven surfaces. The hydrostatic transmission allows for smooth speed adjustments and effortless maneuvering. This feature is particularly beneficial when operating in tight corners or delicate areas where precision is essential.

The snow blower is powered by a reliable 2-stage engine, which generates ample power for heavy-duty snow clearing. The two-stage system means that after the auger gathers snow, it is thrown out of the discharge chute with significant force, making it ideal for dealing with packed snow and deep drifts. The adjustable chute also allows users to direct the snow far away from the cleared area, preventing it from being blown back onto already cleared surfaces.

In terms of comfort, the Cub Cadet 826 4x4 prioritizes ease of use. It features heated hand grips that keep operators warm during extended periods of cold weather. Moreover, the large, easy-to-operate controls are designed to minimize fatigue, allowing users to focus on the job at hand. The machine’s generous fuel tank capacity ensures longer operation times without frequent refueling, adding to its convenience.

Durability is another key characteristic of the Cub Cadet 826 4x4. Built with high-grade materials, it is designed to withstand the rigors of winter use. The high-impact, snow-resistant construction ensures longevity, making it a smart investment for homeowners looking to manage snow effectively year after year.

In summary, the Cub Cadet 826 4x4 is an exceptional snow blower that combines power, technology, and user comfort. Its robust features make it suitable for tackling even the most challenging winter conditions, ensuring users can clear their paths quickly and efficiently. With its combination of durability, performance, and ease of use, the Cub Cadet 826 4x4 is a top choice for anyone looking to conquer snow this winter.