Needed, Level, ConnectingBoosterBatteries

ELECTRICAL SYSTEM

When replacing a battery, make certain the ground cable is connected to the negative (-) terminal on the battery. Be sure the rubber boot is properly positioned over the positive (+) terminal on the battery. NOTE: Both cables must be assembled with the nuts to the inside of the terminals to prevent shorting against fender well.

Cleaning and Servicing the Battery

Occasionally remove the battery cables and brighten the terminal contact surfaces with wire wool, and reassemble them. Apply a light coat of vaseline or chassis lubricant. Be sure the terminals are clamped tightly and that the battery is fastened securely in the battery box. Replace unserviceable cable. Keep the vent holes in the battery filler caps

open.

Keeping the battery fully charged not only adds to its life but makes it available for instant use when

needed.

Liquid Level

Check the battery at least once a month for water

level.

The electrolyte (acid and water) in each cell should be at ring level at all times to prevent battery failure. When the electrolyte is below this level, add pure, distilled water.

Acid or electrolyte should never be added except by a skilled battery man. Under no circumstances add any special battery "dopes", solutions or

powders.

REAR TIRES

6-12 rear tires are standard equipment on the International Cub Cadet 86 and 108 Tractors.

23 x 8.50-12 high floatation tires are standard equ ipment on the I nternational Cub Cadet 128, 129, and 149 Tractors. They are also available as optional equipment when ordered for the International Cub Cadet 86 and 108 Tractors.

CAUTION! If the rider is to be tipped up or on its side remove the batteries to avoid spilling the electrolyte. Battery

electrolyte is poisonous and can be injurious to eyes, skin, and clothing. If electrolyte is spilled, flush immediately with a solution of one part baking soda to four parts water.

ConnectingBoosterBatteries

When required, a booster 12-volt battery may be connected in parallel with the 12-volt system on International Cub Cadet Tractors.

CAUTION I Gas discharged by batteries isexp Avoid sparks near the batteries.

NOTE: All circuits must be turned "off". Electri- cal system is NEGATIVE (-) grounded only. Reversed polarity will result in permanent damage to components of the electrical system.

The first jumper cable must connect the positive

(+)terminal of the booster battery and the positive terminal of the battery on the tractor.

The second jumper cable must first be connected to the negative (-) terminal of the booster battery; and then to a point on the frame of the tractor, away from the battery, having a good ground, so no spark occurs near the battery.

For dependable battery service, see your I nternational Harvester dealer.

23 x 10.5-12 tires are standard on the International Cub Cadet 169 Tractor.

The high floatation tires provide maximum mobil- ity in sand, snow, and soft soil conditions. The reduced ground pressure and low inflation provides maximum protection for turf, soil and crops.

108, 149, 169, 129, 128 specifications

The Cub Cadet series of tractors, particularly models 129, 86, 169, 149, and 128, represents a significant chapter in the history of garden and lawn care machinery. Known for their durability and innovative features, these tractors offer a blend of power and functionality that appeals to both homeowners and agricultural enthusiasts.

One of the main attractions of these models is their robust construction. Built with a heavy-duty frame, they are designed to withstand the rigors of outdoor tasks such as mowing, tilling, and hauling. The engines are typically Kohler or Tecumseh, providing reliable performance and ample power for various attachments. This capability allows these tractors to excel in tasks, from simple grass cutting to challenging snow removal.

The Cub Cadet 129, for example, offers a 12-horsepower engine, making it suitable for many residential landscaping needs. Its hydrostatic transmission provides smooth operation, allowing for easy speed adjustments without having to shift gears manually, making it user-friendly. Likewise, the 149 model features a similar engine, with the added benefit of a wider cutting deck, improving efficiency for larger lawns.

The Cub Cadet 86 stands out with its unique design and powerful 8 horsepower engine. It also features easy access controls, allowing operators to efficiently switch between various attachments, enhancing overall productivity. This fluidity is mirrored in the 169 model, which integrates advanced steering mechanisms that provide greater maneuverability, allowing users to navigate tight spaces with ease.

Model 128 offers a blend of modern technology and classic charm. It is equipped with a comfortable seat for extended usage and ergonomic controls, responding to the needs of users who spend considerable time on their tractors. The combination of comfort and performance makes these tractors popular among gardening aficionados.

Overall, the Cub Cadet series boasts a legacy of reliability, with a focus on ergonomic design and user-friendly technology. Whether for professional landscaping or personal gardening, these models, with their powerful engines and robust capabilities, continue to be a preferred choice for those looking to enhance their outdoor experience.

Cub Cadet 129, 86, 128, 169, 149, 108 manual Needed, Level, ConnectingBoosterBatteries, Rear Tires

Models: 108 149 169 129 128 86