Assembly & Set-Up

3

 

 

 

Contents of Carton

 

•

One Lawn Mower

•

One Lawn Mower Operator’s Manual •

One Bottle of Oil

•

One Grass Catcher

•

One Side Discharge Chute

 

Assembly

NOTE: This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the Engine Operation section BEFORE operating your mower.

Handle

1.Remove any packing material which may be between upper and lower handles.

a.Pull up and back on upper handle as shown in Fig.

3-1. Make certain the lower handle is seated securely into the handle mounting brackets. Do not crimp cable while lifting the handle up.

2.Insert a carriage bolt found in the manual bag into the upper hole on the handle mounting bracket. Secure with one plastic wing nut, also included in the manual bag.

Repeat on other side with remaining hardware. See Fig. 3-2.

Handle Hardware

Carriage Bolts (2)

Wing Nuts (2)

A

Figure 3-2

B

Figure 3-1

b.Tighten star knobs to secure upper handle to lower handle. Make sure that each carriage bolt is seated properly in the handle.

9