Side Discharge Chute

To convert to side discharge, make sure grass catcher is off of the unit, the rear mulch plug is removed, and rear discharge door is closed.

1.On the side of the mower, lift the mulching plug.

2.Slide chute hooks under hinge pin on mulching plug assembly. Lower mulching plug. See Figure 3-7. Do not remove side mulching plug at any time, even when you are not mulching.

Adjustments

Cutting Height

1.The cutting height adjustment lever is located above the rear left wheel. See Figure 3-8.

B

A

C

Figure 3-7

Figure 3-8

a.Pull the lever out and away from the mower.

b.Move the lever forward or back for desired cutting height.

c.Release lever towards mower deck.

Set-Up

Gas and Oil Fill-Up

Refer to the Engine Operation section in the Engine manual for additional engine information.

1.Add oil provided before starting unit for the first time out of the box.

2.Service the engine with gasoline as instructed in the Engine Operation section of the Engine manual.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition.

3.Charge battery as instructed in the Service section of this manual (Electric Start Units).

Section 3 — Assembly & Set-Up

 

11