Assembly & Set-Up

3

 

 

 

Contents of Carton

 

•

One Lawn Mower

•

One Grass Catcher

•

One Side Discharge Chute

•

One Lawn Mower Operator’s Manual

•

One Engine Operator’s Manual

•

One Bottle of Oil

Assembly

NOTE: This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the Engine Operation section of this manual BEFORE operating your mower.

Handle

1.Remove any packing material which may be between upper and lower handles.

a.Pull up and back on upper handle as shown in Figure

3-1. Do not crimp cable while lifting the handle up.

Remove star knobs from handle mounting brackets and secure the lower handle onto the handle brackets by placing the lower hole of the lower handle onto the pins of the handle brackets.

b.Tighten star knobs securing upper handle to lower handle. See Figure 3-1. Make sure that each carriage bolt is seated properly in the handle.

2.Tighten star knobs securing lower handle to handle brackets. See Figure 3-2. Make certain the lower handle is seated securely into the handle mounting brackets.

A

Figure 3-2

3. The rope guide is attached to the right side of the upper

Bhandle. Loosen the wing nut which secures it to the upper handle. Refer to Figure 3-3.

A B

B

Figure 3-1

C

D

Figure 3-3

9