Cub Cadet Fabricated Deck InDirect Injection Diesel service manual Specifications

SPECIFICATIONS

GENERAL INFO.
Controls:	Engine ignition and start switch; throttle; left and right steering
	levers; electric blade clutch switch; parking brake; mower deck lift
Parking Brake:	Mechanical linkage attached to the brake handle and drum
	brakes
Seat:	Fully adjustable Suspension Seat-fore/aft, seatback, armrests
	and operator weight adjustments
Frame:	2" Steel square tube and plate, all welded construction
Instrumentation:	Hourmeter; Low Voltage, Low Oil Pressure, High Coolant Tem-
	perature, and Glo-Plug activation indicator lights; (tachometer
	optional)
Front Caster Wheels:	13 x 6.50 x 6
Drive Wheels:	60" & 72” deck, 24x12 - 12
Tire Pressure:	10-12 psi Rear, 20-25 psi front caster
Fuel Tank:	Two 6.5 gallon w/ shutoff valves
Ground Speed:	0-12 + MPH forward. 0-5 MPH reverse
Net Weight:	1460 lbs. w/60" deck, & 1540 lbs. w/72” deck
Operator Protective	Roll Over Protective Structure, Retractable Seat Belts, Brush
Device:	Guard, and Sun Canopy
ENGINE INFO.
Engine:	28.2HP, InDirect Injection, Caterpillar diesel, 1.131 liters
Type:	Horizontal Crankshaft, 3 cylinder in-line, 23:1 compression
Air Cleaner:	Dual Element, Canister Type
Lube System:	Pressurized with oil filter Shell Rimula 15W40-4.3 quarts
Hydraulic System:	3 quart capacity, One quart filter Shell Rimula 15W40, CI-4 plus
Coolant:	Shell Dex-Cool ELA 50/50 antifreeze
Starter:	12-volt electric, cold limit -20C (-4F)
Blade Brake Clutch:	Electric
TRACTION DRIVE INFO.
Traction Drive:	Variable-speed hydrostatic pumps and hydraulic wheel motors for
	each drive wheel
CUTTER DECK INFO.
Cutter Deck;Drive:	60” & 72” Belt Driven
Deck Lift:	Hand lever w/pin lock for height adjustment & foot pedal assist
Cutting Height:	1-1/2" to 5"
No. of Blades	3, attach to spindle with 3/4” bolts
Deck Spindles:	1-1/4” diameter tapered-roller bearings, aluminum housing

8