Connecting the Battery Cables

CALIFORNIA PROPOSITION 65 WARNING!

Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

CAUTION: When attaching battery cables, always connect the POSITIVE (Red) wire to its terminal first,

followed by the NEGATIVE (Black) wire. To connect the battery cables, proceed as follows:

NOTE: The positive battery terminal is marked Pos. (+). The negative battery terminal is marked Neg. (–).

1.Removetheplasticcover,ifpresent,fromthepositive(+)battery terminal and attach the red cable to the positive battery terminal (+) with the bolt and hex nut. See Figure 3-3.

Figure 3-3

2.Removetheplasticcover,ifpresent,fromthenegative(–)battery terminal and attach the black cable to the negative battery terminal (–) with the bolt and hex nut. See Figure 3-3.

3.Positiontheredrubberbootoverthepositivebatteryterminalto help protect it from corrosion.

NOTE: If the battery is put into service after the date shown on top/side of battery, charge the battery as instructed in the Maintenance section your Operator’s Manual prior to operating the tractor.

Checking Tire Pressure

WARNING! Do not overinflate tires. Check sidewall of tires for maximum psi. Equal tire pressure should

be maintained at all times.

The tires on your tractor may be over inflated for shipping purposes. Reduce the tire pressure before operating the tractor. Check sidewall of tires for maximum psi.

Setting the Deck Gauge Wheels

Move the tractor on a firm and level surface, preferably pavement, and proceed as follows:

1.Select the height position of the cutting deck by placing the deck lift lever in the normally desired mowing height setting (any of the six different cutting height notches on the right fender).

2.Check the gauge wheels for contact or excessive clearance with the surface below. The deck gauge wheels should have between ¼” and ½” clearance above the ground:

3.If the gauge wheels have excessive clearance or contact with the surface, adjust as follows:

a.Raise the deck lift handle to its highest setting.

b.Removethefrontandreargaugewheelsbyremovingthe lock nuts and shoulder screws which secure them to the deck. See Figure 3-4.

Figure 3-4

c.Place the deck lift lever in the desired mowing height setting.

d.Reinsert the shoulder screw (with each gauge wheel) into the index hole that leaves approximately

½” between the bottom of the wheel and the pavement.

Refer to Leveling the Deck in the Maintenance section of this manual for more detailed instructions regarding various deck adjustments.

10

Section 3 — Assembly & Set-Up

Page 9 Page 11
Page 10
Image 10
Cub Cadet LTX1042KW, LTX1046M, LTX1045 Connecting the Battery Cables, Checking Tire Pressure, Setting the Deck Gauge Wheels
Page 9 Page 11

LTX1045, LTX1042KW, LTX1046M specifications

Cub Cadet is a well-known name in the lawn care industry, renowned for producing high-quality riding mowers. Among their popular models are the Cub Cadet LTX1046M, LTX1042KW, and LTX1045, each designed to deliver exceptional performance and ease of use.

The Cub Cadet LTX1046M features a robust 19.5 HP Kohler engine, providing ample power for tackling large lawns. Its 46-inch deck allows for efficient cutting while reducing mowing time. The LTX1046M also includes a hydrostatic transmission, which offers seamless speed adjustments, making it easier to navigate various terrains. The Comfort Glide front axle enhances maneuverability and reduces the impact of uneven ground, ensuring a smoother mowing experience.

On the other hand, the LTX1042KW is equipped with a reliable 18 HP Kawasaki engine, emphasizing performance and fuel efficiency. This model boasts a compact 42-inch mowing deck, allowing it to navigate tighter spaces while still delivering a clean cut. The LTX1042KW features a dual blade cutting system, providing superior grass clipping distribution and reducing the likelihood of clumping. Additionally, its Ergonomic steering wheel ensures comfort during prolonged usage.

Meanwhile, the LTX1045 provides an excellent balance of power and versatility with a 22 HP Kohler engine. Its 45-inch deck offers flexibility in handling larger areas while still being efficient around obstacles. This model is designed with a premium seat featuring high back support, allowing users to mow comfortably for extended periods. The LTX1045 also includes an optional bagging attachment, making it ideal for users who prefer to collect clippings for a tidier lawn.

All three models feature Cub Cadet's signature Cut Model technology, which enhances cutting performance and ensures a clean finish. The Easy Clean Deck design makes maintenance simpler, allowing users to wash the deck without heavy lifting. Additionally, the intuitive control panel across all three mowers provides users with easy access to essential functions, including blade engagement and ignition.

In summary, whether you choose the LTX1046M, LTX1042KW, or LTX1045, each model offers unique features and reliable performance, making them excellent choices for lawn care enthusiasts. These riding mowers combine power, comfort, and advanced technology to ensure that your lawn always looks its best.
Top Page Image Contents