12.A missing or damaged discharge cover can cause blade contact or thrown object injuries.

13.Stop the blade(s) when crossing gravel drives, walks, or roads and while not cutting grass.

14.Watch for traffic when operating near or crossing roadways. This machine is not intended for use on any public roadway.

15.Do not operate the machine while under the influence of alcohol or drugs.

16.Mow only in daylight or good artificial light.

17.Never carry passengers.

18.Disengage blade(s) before shifting into reverse. Back up slowly. Always look down and behind before and while backing to avoid a back-over accident.

19.Slow down before turning. Operate the machine smoothly.

Avoid erratic operation and excessive speed.

20.Disengage blade(s), set parking brake, stop engine and wait until the blade(s) come to a complete stop before removing grass catcher, emptying grass, unclogging chute, removing any grass or debris, or making any adjustments.

21.Never leave a running machine unattended. Always turn off blade(s), place transmission in neutral, set parking brake, stop engine and remove key before dismounting.

22.Use extra care when loading or unloading the machine into a trailer or truck. This machine should not be driven up or down ramp(s), because the machine could tip over, causing serious personal injury. The machine must be pushed manually on ramp(s) to load or unload properly.

23.Muffler and engine become hot and can cause a burn. Do not touch.

24.Check overhead clearances carefully before driving under low hanging tree branches, wires, door openings etc., where the operator may be struck or pulled from the machine, which could result in serious injury.

25.Disengage all attachment clutches, depress the brake pedal completely and shift into neutral before attempting to start engine.

26.Your machine is designed to cut normal residential grass of a height no more than 10”. Do not attempt to mow through unusually tall, dry grass (e.g., pasture) or piles of dry leaves. Dry grass or leaves may contact the engine exhaust and/ or build up on the mower deck presenting a potential fire hazard.

27.Use only accessories and attachments approved for this machine by the machine manufacturer. Read, understand and follow all instructions provided with the approved accessory or attachment.

28.Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability

to operate the riding mower safely enough to protect themselves and others from serious injury.

29.If situations occur which are not covered in this manual, use care and good judgment. Contact your customer service representative for assistance.

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

For your safety, use the slope gauge included as part of this manual to measure slopes before operating this machine on a sloped or hilly area. If the slope is greater than 15 degrees as shown on the slope gauge, do not operate this machine on that area or serious injury could result.

Do:

1.Mow up and down slopes, not across. Exercise extreme caution when changing direction on slopes.

2.Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

3.Use slow speed. Choose a low enough speed setting so that you will not have to stop or shift while on the slope. Tires may lose traction on slopes even though the brakes are functioning properly. Always keep machine in gear when going down slopes to take advantage of engine braking action.

4.Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

5.Use extra care with grass catchers or other attachments. These can change the stability of the machine.

6.Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Rapid engagement or braking could cause the front of the machine to lift and rapidly flip over backwards which could cause serious injury.

7.Avoid starting or stopping on a slope. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope.

Do Not:

1.Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.

2.Do not mow near drop-offs, ditches or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff, ditch, or if an edge caves in.

3.Do not try to stabilize the machine by putting your foot on the ground.

4.Do not use a grass catcher on steep slopes.

5.Do not mow on wet grass. Reduced traction could cause sliding.

6.Do not shift to neutral and coast downhill. Over-speeding may cause the operator to lose control of the machine resulting in serious injury or death.

7.Do not tow heavy pull behind attachments (e.g. loaded dump cart, lawn roller, etc.) on slopes greater than 5 degrees. When going down hill, the extra weight tends to push the tractor and may cause you to loose control (e.g. tractor may speed up, braking and steering ability are reduced, attachment may jack-knife and cause tractor to overturn).

4

Section 2 — Important Safe Operation Practices

Page 4
Image 4
Cub Cadet SLTX1054 warranty Slope Operation, Do Not

SLTX1054 specifications

The Cub Cadet SLTX1054 is a robust riding lawn mower designed for homeowners seeking power, precision, and ease of use in lawn care. With its strong build and user-friendly features, this mowing machine stands out in the crowded market of garden equipment.

One of the key features of the SLTX1054 is its powerful 26-horsepower Kohler engine. This V-twin engine ensures efficient performance, offering plenty of torque for tough mowing jobs. The engine is designed with durability in mind, allowing for consistent performance over time, even in demanding conditions.

The 54-inch cutting deck is another notable aspect of the SLTX1054. This wide deck allows for expansive coverage, making it ideal for medium to large lawns. The deck is equipped with a combination of high-performance blades that deliver a clean cut, promoting healthier grass growth. With adjustable cutting heights ranging from 1.5 inches to 4 inches, homeowners can customize their mowing experience based on their lawn's specific needs.

The Cub Cadet SLTX1054 also showcases advanced technologies that enhance usability. The hydrostatic transmission offers smooth acceleration and effortless operation. This feature enables the operator to control the mower's speed with a simple push of the pedal, eliminating the need for gear shifting, which can be cumbersome on traditional lawn tractors.

Another highlight is the tight turning radius, which allows users to maneuver easily around flower beds, trees, and other obstacles. This agility reduces the need for additional trimming and provides a cleaner finish overall. The comfortable, adjustable high-back seat ensures an enjoyable driving experience for longer mowing tasks, reducing fatigue for the operator.

The SLTX1054 is also equipped with a dash-mounted deck lift, enabling users to raise and lower the mowing deck conveniently without leaving the driver's seat. This feature simplifies transitions between different cutting heights, making it easier to adapt to changing terrains.

Durability is a hallmark of the Cub Cadet brand, and the SLTX1054 is no exception. With its reinforced steel frame and rugged construction, this mower is built to withstand the rigors of regular lawn maintenance. Its tough, powder-coated finish adds an extra layer of protection against rust and corrosion.

In conclusion, the Cub Cadet SLTX1054 combines power, performance, and ease of use in a single package. With features like a robust engine, expansive cutting deck, hydrostatic transmission, and advanced maneuverability, this riding mower is a fantastic choice for homeowners looking to maintain their lawns efficiently and effectively. Whether tackling large lawns or navigating tight spaces, the SLTX1054 is up to the challenge.