Step 5. | PATENT NO. US 6,640,532 B1 |
|
Manual
3Hitch Clevis Assembly
2
11" |
10" |
9" |
8" |
7" |
6" |
T O P E D G E O F PA G E
11"
10"
9"
NOTE: Step 4 is for attaching the Hitch Clevis Assembly
(1)to the TowTubes(2), When complete, the tow tubes(2) will be approximately level with the pavement:
a) Using this page, set the manual on the floor and measure your hitch height as shown in illustration.
b) Position the Hitch Clevis Assembly between the tow tubes for the proper height.
c) Attach the Hitch Clevis Assembly to the tow tubes as shown in Step 4.
d) Attach the sweeper to the tractor.
e)Adjust the lift handle (3) to position the sweeper brushes to sweep at the same hieght as the mower blades.
f)Recheck the Tow Tube for level. The tubes should be level or slightly higher at sweeper. Readjust clevis if necessary.
g)When the proper Hitch Clevis level is achieved, securely tighten the Lock Nuts (9) installed in Step 4.
B O T T O M E D G E T O G R O U N D
8"
7"
6"
