2.Remove the two shoulder bolts and lock nuts in the seat pan as shown in Fig. 3-3.

Figure 3-3

3.Rotate the seat into position and secure the seat into place with the previously removed shoulder bolts and lock nuts. Be careful not to crimp or damage the wire harness while installing the seat. See Fig. 3-4.

Adjusting the Seat

To adjust the position of the seat, push the seat adjustment lever to the left. Slide the seat forward or rearward to the desired position; then release the adjustment lever. Make sure seat is locked into position before operating the tractor. See Fig. 3-5.

Figure 3-5

Install the Rear Hitch Bracket

1.Remove the hex flange screws and flange lock nuts that secure the hitch bracket and muffler mount bracket to the bumper bracket. See Fig. 3-6.

 

 

Flange

 

Hitch

Lock

Hex Flange

Nuts

Bracket

 

Screws

 

 

Figure 3-4

 

 

 

 

Muffler Mount

 

 

Bracket

 

 

Figure 3-6

10Section 2— Assembly & Set-Up