Installing the LPG Tank

1.Open the straps and carefully place the LPG tank into the straps with the cylinder valve guard towards the left. Be sure that the alignment pin fits into the slot on the bottom of the cylinder valve guard. See Fig. 3-3.

Cylinder Valve Guard

Slot

Alignment Pin

Figure 3-3

2.When the tank is in place, secure it by locking down the straps (A). See Fig. 3-4.

A

A

B

C

Figure 3-4

3.Install the regulator hose on the LPG tank fuel valve (B) and secure it by twisting it counter-clockwise(C). See Fig. 3-4.

NOTE: The hose has left-handed threads to prevent improper usage.

Steering Wheel Column

The steering wheel column is tilted all the way back for shipping purposes. To tilt the column forward, press the steering tilt pedal. Release the steering tilt pedal when the column is in the desired position.

Steering Wheel

1.Remove the hardware for attaching the steering wheel from beneath the steering wheel cap. Carefully pry off the steering wheel cover to remove the hardware.

2.With the wheels of the tractor pointing straight forward, place the steering wheel over the steering shaft.

3.Place the flat washer and belleville washer over the steering wheel and secure with the hex screw. See Fig. 3-5.

Steering Wheel Cover

Flat Washer

Hex Screw

Belleville Washer

Steering Wheel

Steering Wheel

Column

Figure 3-5

4.Place the steering wheel cover over the center of the steering wheel and push downward until it “clicks” into place.

10Section 2— Assembly & Set-Up