Cuisinart CCP-10 manual Before First Time Use, Getting to Know Your Electric Cookie Press

IMPORTANT SAFEGUARDS

Basic safety precautions should always be followed when using electrical appliances:

1.Read entire instruction booklet carefully.

2.Do not immerse or rinse motor body, cord or plug in water or any other liquid.

3.This appliance is not for use by or near children.

4.The unit should be unplugged when not in use, before putting on or taking off parts, and before cleaning.

5.Do not touch moving parts.

6.Using attachments that are not recommended or sold by the manufacturer of this appliance can result in fire, electric shock, or injury.

7.For indoor use only.

8.Keep hands, hair and clothing, as well as utensils, away from moving parts, discs, and tips while processing, to prevent the risk of severe injury to persons or damage to the cookie press.

9.Handle discs and tips carefully when removing, inserting or cleaning.

10.Lock cover and tube securely in place before operating appliance. Do not try to remove tube or tube cover while in use.

SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY

POLARIZED PLUG

To reduce the risk of electric shock, this polarized (one prong larger than the other) plug will fit into a polarized outlet only one way. If it does not fit correctly into the outlet, reverse the plug. If the plug still does not fit, consult a professional electrician. Modifying the plug in any way will defeat this safety feature and increase the risk of injury.

SHORT POWER CORD

To reduce the hazards resulting from a longer cord, a short power-supply cord is supplied. If desired, use an extension cord and make sure the marked electrical rating is at least as great as the electrical rating of the appliance. The extension cord should not hang over the counter or tabletop where it could be tripped over or pulled on.

Before First Time Use:

1.Unpack the cookie press and all accessories with care.

2.Wash cookie discs, pastry tips, pastry tip adapter, tube cover, pastry tip cover, tube, shaft adapter, press disc and shaft with warm, soapy water. Rinse and dry completely.

3.Wipe all surfaces of the motor body with a slightly moistened, soft cloth and dry thoroughly. MAKE SURE THE UNIT IS UNPLUGGED.

4.Never immerse the motor body, plug or cord in water or any other liquid, and do not use steel wool, scouring pads or abrasive cleansers as they will damage the finish.

5.Dry all parts completely to ensure that no water enters the motor body.

Getting to Know Your

ELECTRIC Cookie Press

Assembly Instructions

1.Place the shaft adapter onto the motor body and turn slightly to align the arrows (see Figure 1).

2.Insert the stem of the shaft into the shaft adapter center hole. Push the shaft completely inside the unit and press firmly into place (see Figure 2). The outside contours of the discs on the shaft and the shaft adapter should line up.

3.Choose your preferred disc and place it inside the tube cover. Place the tube cover onto the tube and turn clockwise until it locks in place (see Figure 3).

If you are using a pastry tip, refer to Figure 4. Put the desired tip over the pastry tip adapter and secure with the pastry tip cover. Put the pastry tip assembly into the tube cover, place the tube cover onto the tube and turn clockwise to a locked position.

2