Manuals / Cuisinart / Kitchen Appliance / Blender

Cuisinart CH-4 Tips for Processing Food, Size, Quantity, Selecting the Right Operating Control

Models: CH-4

1 12
Download 12 pages 52.72 Kb
Page 4
Image 4

TIPS FOR

PROCESSING FOOD

Preparing the Food

Size

Always cut large pieces of food into smaller pieces of even size – about 1⁄2 inch (12mm) to a side or as specified under Operation/ Technique on pages 6 and 7. If you don't start with pieces that are small and uniform, you will not get an even chop.

Quantity

Do not overload the work bowl. Overloading causes inconsistent results and it strains the motor. As a rule of thumb, remember most foods should not reach more than 2⁄3 of the way up the workbowl. Use the quantities given in the charts and recipe section as a guide.

Note: Due to the powerful motor provided with this unit, it is recommended to use one hand to support the Cuisinart Elite Collection® Chopper/ Grinder during operation.

Selecting the Right Operating Control

Use the Chop function for chopping, puréeing and mixing. It is the right choice, for example, for chopping soft, fragile food such as herbs, celery, onions, garlic and most cheeses. It

is also the right choice for puréeing cooked vegetables, making mayonnaise, and mixing salad dressing.

Pulse action is best when you are using the Chop function. Two or three pulses are often enough. Be sure to check the food frequently to prevent overprocessing. If you overprocess, you are likely to get a watery paste instead of a fine chop.

Use the Grind function for grinding spices, and for chopping hard food such as peppercorns, seeds, chocolate and nuts.

Continuous-hold action is best when you are using the Grind function. You may have to oper- ate the Cuisinart Elite Collection® Chopper/ Grinder for several seconds with some food to achieve the desired results – or as long as

20 seconds for some seeds.

When you operate the unit for more than 10 seconds, use a pulse action every 10 seconds or so to allow food to drop to the bottom of the work bowl. This provides more consistent results.

Never operate the Cuisinart Elite Collection® Chopper/Grinder continuously for longer than 1 minute at a time.

Note: The work bowl and cover may become scratched when you use them for grinding grain and spices. This does not affect the performance of the Cuisinart Elite Collection® Chopper/Grinder. However, you may want to reserve the original bowl for grinding, and purchase an additional bowl and cover set for other uses. These are available from the Cuisinart Customer Service Department, which you can reach by dialing our toll-free number: 800-726-0190.

Adding Liquid

You can add liquids such as water, oil or flavoring while the machine is running. For example, you might want to add oil when mak- ing mayonnaise or salad dressing, or you could add vanilla or alcohol when making frozen yogurt. Pour the liquid through one of the two openings in the cover.

IMPORTANT: Add liquid through only one opening at a time. The other opening must be left free to allow air to escape. If both openings are blocked, liquid cannot flow smoothly into the bowl.

Removing Food from the Sides of the Bowl Occasionally food will stick to the sides of the bowl as you process. Stop the machine to clear food away. AFTER THE BLADE HAS STOPPED MOVING, remove the cover, and use the spatula

to scrape the food from the sides of the bowl back into the center. Do not put hands into bowl unless unit is unplugged.

Note: Handle with care – the blade is not permanent.

PROCESSING FOOD

1.Place the work bowl firmly on the motor base. Opening at back of bowl must face column at back of the Cuisinart Elite Collection® Chopper/Grinder. Turn bowl counterclockwise to lock in place.

2.Insert the blade assembly. Carefully pick up the blade by its hub and place on the center stem until it drops to the bottom of the stem. Firmly push to lock the blade into position.

NEVER TOUCH THE BLADE ITSELF AND NOTE THE BLADE IS NOT PERMANENTLY LOCKED.

3.Place food in the work bowl. Be sure the food is cut into small pieces, and the bowl is not overloaded.

4.Lock the cover into position.

5.Press the appropriate Chop or Grind control, depending on the food you are processing.

6.When you have finished processing the food, stop the machine by releasing the control button.

7.WHEN THE BLADE STOPS MOVING, unplug the unit.

8.Remove cover and work bowl

a.Turn work bowl cover clockwise to remove.

b.Turn work bowl clockwise to unlock it and lift it off base.

NOTE: Thicker ingredients can be removed while work bowl is still on base.

4

Page 3 Page 5
Page 4
Image 4
Cuisinart CH-4 manual Tips for Processing Food, Size, Quantity, Selecting the Right Operating Control, Adding Liquid
Page 3 Page 5

CH-4 specifications

The Cuisinart CH-4 is a versatile and efficient food processor that has become a staple in kitchens around the world. Known for its user-friendly design and powerful performance, this compact model is ideal for both amateur cooks and professional chefs who desire high-quality results in less time.

One of the main features of the Cuisinart CH-4 is its powerful motor, capable of handling tough food preparation tasks with ease. With a robust 250-watt motor, it ensures that the processor can chop, slice, and blend a variety of ingredients quickly and efficiently. This strength makes it an excellent choice for preparing salsas, sauces, and even finely chopping herbs and nuts.

The CH-4 also includes a 4-cup work bowl, which is adequately sized for small to medium-sized food prep tasks. Its compact design makes it easy to store, while still providing enough capacity to handle a variety of recipes. The bowl is made of durable plastic, providing a clear view of the ingredients while blending, so users can monitor their progress without lifting the lid.

Another notable feature is the stainless steel blade, which is sharp and designed for precision cutting. The blade is reversible, with one side for chopping and the other for slicing, making it versatile for tasks ranging from chopping vegetables to preparing dough. The easily removable blade is also dishwasher safe, simplifying cleanup after use.

The Cuisinart CH-4 integrates several user-friendly technologies to enhance the cooking experience. It features a one-touch operation system, allowing users to easily engage the processor with a simple press of a button. This straightforward control is ideal for those who may not be familiar with advanced kitchen appliances, enabling anyone to whip up delicious dishes effortlessly.

Safety is also prioritized in the design of the CH-4. The processor will only operate if the bowl and lid are properly secured, preventing accidents during use. This ensures peace of mind while preparing meals, especially for novice cooks.

In summary, the Cuisinart CH-4 stands out due to its powerful motor, compact design, and user-friendly features. Its versatility, safety mechanisms, and ease of operation make it a must-have kitchen tool for anyone looking to enhance their culinary skills without sacrificing time or efficiency. Whether chopping vegetables or mixing dough, this food processor is sure to deliver high-quality results consistently.