6. Place the corded handset in the base.
11
7.Plug the power supply cord into the 12V DC power jack on the back of the base and the other end into an AC electrical
outlet.6
8.Plug the short telephone line cord into the PHONE LINE jack on the back of the base.
9.Feed the short line cord through the grooves provided so that the base area is flat and ready to mount on the wall, and plug the other end of the line cord into a modular phone jack.
10.Slip the mounting holes on the base over the wall plate posts and slide the unit down firmly into place. (Wall plate not included).
11.Raise the base antenna.
Installation continued on next page.
VERY IMPORTANT: You must complete the corded base unit connections before the cordless handset can be used. Otherwise, it WILL NOT work. See steps
8
10
9
7
11
