CONTROL PANEL
1
2b |
|
|
|
|
|
| 3 | ||||||
|
|
|
|
|
| ||||||||
|
|
|
|
|
| 2e | |||||||
2a |
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
| |||||||
4 |
|
|
|
|
|
|
|
|
|
|
| 2 | |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| ||
2c |
|
|
|
|
|
|
|
|
|
| 2d | ||
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
| 2f | ||
|
|
|
|
|
|
|
|
|
|
| |||
1.Clock Display
Displays time of day and auto on/off times.
2.Function Knob
For use in turning coffeemaker on and off, setting time of day, and setting auto on and auto off times.
a.On: The On function starts the brew cycle.
b.Off: The Off function ends the brew cycle.
c.Auto On: The Auto On feature is used to program the start time of the brew cycle. The auto on time can be set for any time of day or night. The “PM” indicator is displayed on the LCD for nighttime program times.
d.Auto Off: The Auto Off function is used
to shut off the coffeemaker at a
e. Program Set: The Program Set function is used to set the time for the Auto On function.
f. Clock Set: The Clock Set function is used to set the time of day.
g. Audible Tone (not shown): The Programmable Filter Brew™
3.Hour and Minute Buttons
For use in setting hour and minutes for time
of day, auto on time and auto off time.
4. On and Auto On Indicator Lights
PROGRAMMING YOUR COFFEEMAKER
1.To turn the coffeemaker on and off:
a.Turn on: To turn coffeemaker on, turn the function knob to the “On” position. The red “On” indicator light illuminates and brewing cycle starts.
b.Turn off: Turn the function knob to
the off position.
2.To set the time:
Turn the function knob to “Clock”. The numerals start to blink. Push and hold or pulse the “Hour” or “Minute” buttons to set the time of day.
Turn the function knob to any other setting to begin time, or simply wait until the numerals stop blinking.
a.“Hour” Button: To change the hour, press the “Hour” pushbutton. Pressing and holding the pushbutton will cause hours to increase more rapidly. Pulse the pushbutton to increase hour more slowly. When the number count passes 12, the PM light acti- vates and will be displayed on the LCD. b. “Minute” Button: To change the minute, press the “Minute” pushbutton. Pressing and holding the pushbutton will cause min- utes to increase more rapidly. Pulse the pushbutton to increase minutes more slowly.
Note: As you scroll, the numbers will advance slowly at first and then speed up to the rate of about three per second. When the number displayed approaches the desired setting, release the button and press repeatedly to advance one digit at a time.
3.To program the Auto On:
Turn the function knob to “Program” to set the desired time to engage the Auto On. Change the auto on time with the program setting using the minute and hour pushbuttons, as you would to set the time of day. Then turn the function knob to “Auto On”. The LCD will display the current time. The green light comes on to signal that
6
