Cuisinart dgb300 manual Flavor System Settings, Grinder/Filter Basket, Handle, Water Reservoir

10

11

12

14

13

16 17 18

10. Flavor System Settings

Provide guidelines for optimum flavor extraction, based on number of cups being brewed.

11.Filter Basket Cover/Filter Holder To put on or remove, grasp cover in area indicated by arrows. NOTE: COVER MUST BE

IN PLACE FOR UNIT TO OPERATE. Warning: This lid becomes hot after coffee has been brewed. Use caution when removing the lid. Filter holder has a self-centering ring to keep paper filters in the proper location. Note: This piece is intentionally fitted loosely to the filter lid.

12.Grinder Basket Lid

Use the recess on each side of the lid to remove lid and add beans easily. Note: Lid must be in place for unit to operate.

13. Grinder/Filter Basket

This is a one piece basket which holds the permanent or paper filter on one side, and the whole bean grinder on the other side. NOTE:

FILTER BASKET MUST BE IN PLACE FOR

15UNIT TO OPERATE.

A note about filters: When using a permanent filter like the Cuisinart® gold-tone filter, be sure that the handle is positioned away from the grinder basket. If not, the handle may interfere with the flow of coffee into the filter basket.

Also note: using a permanent or gold-tone filter will allow some fine coffee grounds to fall into the coffee carafe. This will appear as sediment in the carafe.

14. Finger Grips

Use these and the handle to easily lift the grinder/filter basket out for cleaning.

15. Handle

Use this and the finger grips to easily lift the grinder/filter basket out for cleaning.

16. Steam Safety Valve

Do not touch this valve. Doing so may release steam or hot water and cause personal injury. The valve is designed to keep steam away from exposed areas.

17. Steam Collector

Prevents steam from escaping from unit. Unplug cord from outlet and allow unit to cool before cleaning. To clean: remove by lifting up and out. Run under warm water. To replace: place hooks on locating notches.

18. Water Reservoir

8