![](/images/new-backgrounds/1059527/5952719x1.webp)
26664
CLEANING AND MAINTENANCE
No lubrication is needed or required for any moving parts, motor, bearings, or sharpening surfaces. There is no need for water on abrasives. The exterior of the sharpener may be cleaned by carefully wiping with damp cloth. Do not use detergents or abrasives.
Metal dust will slowly accumulate below the Coarse and Fine grinding wheels. A removable drawer can be found underneath the grinding wheels in the rear of the unit. On occasion, remove drawer and wipe with a damp cloth or paper towel. This will remove all of the metal shavings. Replace drawer.
9