Figure 1
Place door on hinges.
Figure 3
Insert tray.
Figure 2
Hook the kettle onto the hanger of the main unit.
Figure 4
Finally, insert the internal kettle plug into the socket on the inner top of the popcorn housing.
POPPING INSTRUCTIONS
1.Follow assembly procedure.
2.Make sure the popcorn maker is unplugged before you do any of the following.
3.Before using the unit, please check carefully to be sure volt- age (120V – 60 Hz ) is suitable to your home.
4.Clean the internal surface of the kettle with warm sudsy water, rinse well and dry with a clean cloth. Wipe down inner and outer housing with damp cloth.
5.Main unit has a
– POP to turn heater, stirrer and light on
4
