6
Connections
CONNECT BD PLAYER TO TV SET BY AV CABLE
Connect the BD player s L and R jack to the audio input jack on the TV.
Connect the BD player s video out jack to the video input jack of TV.
CONNECT THE BD PLAYER TO TV SET USING THE Y/Pb/Pr JACKS
Use the COMPONENT Cable(not supplied) to connect BD player to your TV.
Set the [Primary output] to [Component].
Connect the BD player s L and R jack to the audio input jack on the TV.
Notes: The BD player component output supports 1080i, 720P, 576P and 576i.
You can press RESOLUTION key on the remote controller to set the BD player
component output. If your TV does not accept your resolution setting, an
abnormal picture appears on the screen. Please read TV s owner s manual then
set the resolution that your TV can accept.
Y
U
V
VIDEO
HDMI
R
L
AUDIO IN
HDMI IN
VIDEO IN
YPbPr IN
CONNECT THE BD PLAYER TO TV SET USING THE HDMI OUTPUT
Use the HDMI cable (not supplied) to connect BD player to your TV.
Notes: The player supports video resolution up to 1080p 60Hz on HDMI output. If
the player is set to a resolution the TV cannot support, picture will become abnormal.
Press the RESOLUTION button under STOP status to change the output resolution.
The player can also perform auto detection of supported TV resolution via EDID in
order to avoid the setting of unsupported resolution.