Curtis DVD1100 user manual Audio setup menu, 1Digital Output

SYSTEM SETUP

3. Audio setup menu

Audio Menu
Digital Output	PCM
PCM Downsampling	Off
Dynamic Range Control	Off
BACK	To Index Menu
ENTER: switch menu item	: make choice

3.1Digital Output

Choose preferred option for digital output base on receiver connected to player

PCM: Output PCM audio data for receiver not support Dolby and DTS decoding (mixed primary audio, secondary audio and effect audio if available in disk)

Bitstream: Output raw data for receiver support Dolby and DTS decoding (primary audio only).

Re-encoded DTS: Output DTS data format for receiver if it support DTS decoding (mixed p rimary audio, secondary audio and effect audio if available in disk)

Note: Not setting this item properly may result in noise.

Dolby Digital

DTS and DTS HD

3.2PCM Downsampling: Sets maximum sampling rate for the SPDIF digital audio output (as some SPDIF receivers do not support 192 kHz or even 96 kHz).

48 kHz: Downsample audio with sample rates over 48 kHz.

96 kHz: Downsample audio with sample rates over 96 kHz.

Off : No downsampling on SPDIF output.

3.3Dynamic Range Control: Reduces loudness difference between soft and loud parts of the audio track.

On: Enables dynamic range control for all codecs.

Follow: Enables dynamic range control for all codecs. MLP streams use the DRC level embedded in the audio stream itself.

Off: Turns off dynamic range control.

3.4BACK: Return to main setup menu.

13