SYSTEM SETUP
3. Audio setup menu
Audio Menu |
|
Digital Output | PCM |
PCM Downsampling | Off |
Dynamic Range Control | Off |
BACK | To Index Menu |
|
|
ENTER: switch menu item | : make choice |
|
|
3.1Digital Output
Choose preferred option for digital output base on receiver connected to player
PCM: Output PCM audio data for receiver not support Dolby
and DTS
decoding (mixed primary audio, secondary audio and effect audio if available in disk)
Bitstream: Output raw data for receiver support Dolby and DTS decoding (primary audio only).
Note: Not setting this item properly may result in noise.
Dolby Digital
DTS and DTS HD
3.2PCM Downsampling: Sets maximum sampling rate for the SPDIF digital audio output (as some SPDIF receivers do not support 192 kHz or even 96 kHz).
48 kHz: Downsample audio with sample rates over 48 kHz.
96 kHz: Downsample audio with sample rates over 96 kHz.
Off : No downsampling on SPDIF output.
3.3Dynamic Range Control: Reduces loudness difference between soft and loud parts of the audio track.
On: Enables dynamic range control for all codecs.
Follow: Enables dynamic range control for all codecs. MLP streams use the DRC level embedded in the audio stream itself.
Off: Turns off dynamic range control.
3.4BACK: Return to main setup menu.
13
