Front And Back Panels, Back Panel Functions, MP3 Setting

Language Video Audio More Aud

5.1 channel

2 channel Off

PCM

Raw

Off

5.1 channel

2 channel Off

FRONT AND BACK PANELS

SYSTEM SETUP

Front Panel Functions

	VOLUME
DVD/CD/MP3/HDCD/CD-R/CD-RW
DOWN	UP
DVD6040 DVD HOME THEATER

MP3 Setting

Follow these steps to set the outgoing digital audio format of MP3 tracks (Note: The analog format is fixed to 2 channel ):

A.From Audio mode, press SETUP.

B.Select Audio mode, press ENTER.

C.Select MP3 and press ENTER.

D.Set Digital out to:

PCM (default) to output 2 channel digital from the optical/coaxial digital audio outputs; e.g.,to a Minidisc recorder.

Off to disable MP3 digital output.

E.Press SETUP to save and exit.

Language Video Audio More Aud Rating

AC3	Analog Out	Digital Out
AC3	5.1 channel	PCM
MP3/WMA	5.1 channel	PCM
Others	5.1 channel	PCM

1. POWER

Before plugging the power cord into the AC

outlet, check to make sure all of the connections

have been properly completed. When they have been, carefully plug power cord into outlet.

Press the POWER button on the front panel to power the unit.

When the unit is initially powered, a brief surge

of electricity may cause interference with other electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different circuit.

2. OPEN/CLOSE

Use this button to open and close the disc tray

while in DVD mode.

When in the Tuner mode, this button is used to select preseting or tuning mode.

3. PLAY /AUTO

Use this button to begin play function while in DVD mode.

When in the tuner mode, you may press this button for automatic search..

4. PAUSE/DOWN

Use this button to pause play function while in

DVD mode.

While in the tuner mode, you may press this button for radio down search.

5. STOP /UP Button.

Use this button to stop play function while in DVD mode.

While in the tuner mode, you may press this button for radio up search.

6. INPUT SIGNAL SOURCE

Use this button to select the proper input signal source. (Note: The selected input will correspond to the selected input terminal on the rear panel.)

7.VOLUME

Use this button to control the unit's volume. It

controls all six channels simultaneously.

Others Setting	Language Video Audio More Aud Rating

Follow these steps to set the outgoing analog and digital audio format of others tracks:

A.	From Stop mode, press SETUP.	Analog Out	Digital Out
		5.1 channel	PCM	PCM
B.	AC3
	Select Audio and press ENTER.	5.1 channel	PCM	Raw
	MP3/WMA
C. Select Dolby D and press ENTER.		5.1 channel	PCM	Off
	Others

D.Set Analog out to:

2 Channel (default) to output 2 channel stereo audio from the stereo audio output; e.g.,to a VCR or TV.

E.Set Digital out (from Optical out) to:

PCM (default) to output 2 channel digital audio from the optical/coaxial digital audio outputs; e.g.,to a Minidisc recorder. Raw to output the raw 2 channel digital bitstream form th optical/coaxial digital audio outputs; e.g., to an external

amplifier.

Off to disable CD others audio output.

F.Press SETUP to save and exit.

More Audio Setup

The More Audio menu includes Prologic and Subwoofer settings.

Prologic Setting

The DVD player has a built-in Dolby Prologic decoder to	provide virtual surround sound for PCM
(stereo) source material from the 5.1 channel analog audio outputs.
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.	Language Video	Audio	More Aud Rating
C. Select Prologic and press ENTER.
D. Select the desired Prologic setting and press	Prologic	Off	Off

Back Panel Functions

1. ANTENNA

Use to connect the provided indoor FM and AM loop antennas.

2.AUX IN

Use to connect input for both auxiliary 1 and 2

music sources.

3.AUDIO OUT

Use to connect both the right and left channel

7. FRONT/MAIN

Use to connect the four terminals of the left and right front or main speakers.

8. CENTER/SUBWOOFER

Use to connect the four terminals of the center and subwoofer speakers.

9.COAXIAL DIGITAL AUDIO OUTPUT

10.120V~60Hz

ENTER:	Subwoofer	On	On
Auto stereo audio soundtracks will be output in	Pink Noise	Off
Dolby Prologic mode.	DRC	Off
On all audio soundtracks will be output in Dolby	LPCM 48k DS	Off
On all audio soundtracks will be output in Dolby

Prologic mode.

Off (default ) Dolby Prologic decoding will always be inactive.

E. Press SETUP to save and exit.

line outputs as well as subwoofer output.

4.VIDEO OUTPUT

5.S-VIDEO OUTPUT

6.REAR

Use to connect the four terminals of the left and right surround sound speakers.

This unit comes with an AC power cord. Be sure its prongs are dry before plugging it into an electrical outlet. Take caution not to overextend the cord or walk on it.

11.COMPONENT VIDEO OUTPUT 12.OPTICAL OUTPUT

Subwoofer Setting

You must indicate in the menu system whether or not your audio setup includes a Subwoofer (the 1in 5.1 sourround sound).

A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.
C. Select Subwoofer and press ENTER.
D. Select the desired Subwoofer setting and press	Prologic	Off
ENTER.	Subwoofer	On
On (default) indicates that you are using a Subwoofer	Pink Noise	Off
for LFE (low frequency effects) signals.	DRC	Off
E. Press SETUP to save and exit.	LPCM 48k DS	Off