OPERATING INSTRUCTIONS
Using your radio
1.Plug the AC Power cord into a power outlet.
2.Press the POWER button on the main unit or remote control to turn the system "On".
3.If necessary, press the FUNCTION button to select the Radio mode and the display shows: FM 87.5 MHz.
4.To switch between FM and AM bands press the STOP/BAND button on the front panel or remote.
5.Automatic Tuning - Depress and hold the TUNING / SKIP UP or DN buttons until the display begins to move, then release the buttons. The tuner will scan up or down the band until it finds the first strong station, and then stop on that station. Repeat this process until the tuner stops on your desired station.
6.If you tune to an FM Stereo station the "(ST)" indicator appears in the display.
7.Manual Tuning - Press theTUNING / SKIP UP or DN buttons repeatedly until the display is showing the frequency of your desired station. Use the manual tuning method to tune to weaker stations that are bypassed during Automatic Tuning.
Setting the time
To set the time on your radio:
1.With the power off.
2.Press and hold the MEM/CLK ADJ Button; "12Hr" will blink.
3.Press the SKIP/TUNING Button to set the unit to the 24 hour (24Hr) mode or 12 hour (12Hr) mode.
4.Press the MEM/CLK ADJ Button and the hours will blink.
5.Press the SKIP/TUNING Button to set the current hour, then press the MEM/CLK ADJ again; the minute digits will blink. Press the SKIP/TUNING to set the current minutes.
6.Press the MEM/CLK ADJ Button to confirm the time.
7
