6- Connecting Input Signals to TV
A) Connect with TV signal
Connection steps:
zPower your LCD TV off.
zConnect an antenna cable (CATV) to the corresponding interface connector (75 Ω ANT) on the back of the
zTurn on the power of the
zPress the INPUT button to set the video input mode of the
zYou can use key CH+ / CH- button or the number keys on the remote control to select the channel you want to watch.
B) Connect to external AV devices using Composite and
Connection steps:
zRead the user guide supplied with your AV devices and ensure that it has Composite or
zPower your LCD TV and your AV device off.
zConnect a Composite video cable (not supplied) to the yellow composite video connector input on the back of the
zAlternatively connect a
zConnect the RCA audio cables (not supplied, white and red connectors) from the AV devices’ RCA audio output connectors to the RCA audio input connectors on the back of the
zConnect an antenna cable (CATV) to the corresponding interface connector (75 Ω ANT) on the back of the
zTurn on the power of the
zPress the INPUT button to set the video input mode of the
C)Connect with YPbPr signal Connection steps:
zRead the user guide supplied with your AV devices and ensure that it has a “YPbPr” connector;
zPower your LCD TV off.
zConnect a YPbPr cable to the corresponding interface connector on the back of the
zTurn on the power of the
zPress the INPUT button to set the video input mode of the
zFormat: 480i, 480p, 720p, 1080i.
- 8 -