Curtis RCD-637 Fm Antenna, Adjusting The Sound, Radio Operation, Listening To Compact Disc Cd

!FM ANTENNA

FM antenna wire for better FM reception.

!ADJUSTING THE SOUND

Press the volume +/- buttons to set the sound level. For increased bass at all volume levels, switch the BASS SWITCH on to boost the low frequency sound. To mute the sound, press MUTE button on the remote control the POWER ON / MUTE indicator will flash. To resume the sound, press the MUTE button again or just press the volume +/- button to disable the MUTE function.

!RADIO OPERATION

Set the CD / RADIO switch to RADIO.

FM

Select FM mode band selector switch. Turn the TUNING control to select the required station. The FM STEREO indicate light will show a stereo broadcast is being received. Fully extend the FM antenna and adjust its direction for best FM reception.

AM

Select AM on band selector switch. Turn the TUNING control to select the required station. For opera- tion on AM the set control a built-in ferrite aerial which is directional. Therefore, the set should be positioned for the best signal strength.

FM STEREO RECEPTION

For reception of a FM stereo broadcast station, set the AM / FM / FM ST. switch to FM ST. position. The

" " will indicate on the LCD display when a FM STEREO broadcast is being received.

!LISTENING TO COMPACT DISC (CD)

The LCD indicator always shown the tracks of a disc or program which are still to be played. It works in all modes, in stop modes, all tracks of the disc or the program are shown.

Playing The Entire Disc

1.Playback will start by pressing PLAY/PAUSE, the "PLAY" indicator then appears. Playback starts with the first track.The display shown the current track number.

2.To interrupt playback, press PLAY/PAUSE. The "PLAY" indicator will flash.

3.To resume playback, press PLAY/PAUSE again.

4.To stop playback, press STOP.

Select A Different Track During Play

1.Press SKIP/SEARCH button on the unit (or remote), the required track number appears in the display.

2.Press PLAY/PAUSE button to starting playing. Starting again with the track that is currently playing.

Starting Again With The Track That Is Currently Playing

1.Press SKIP BACKWARD button "I<<" once.

2.The track will be started again from the beginning.

Stopping Play

1.Press STOP if you wish to stop play. The disc and track number which can be played will now appear in the display.

2.Open the CD door on the unit to remove the CD.

UK - 3