Playing Compact Disc, FM & FM-STEREO Reception

FM & FM-STEREO RECEPTION

zSET THE RADIO BAND SELECTOR AT “ FM ” POSITION. PROGRAMS ARE RECEIVED IN MONO MODE. IN PARTICULAR WHEN STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.

zSET THE RADIO BAND SELECTOR AT “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE FM-STEREO LED INDICATOR WILL LIGHT UP TO SHOW FM STEREO PROGRAM IS RECEIVING.

HINTS FOR BEST RECEPTION:-

-AM : THE RECEIVER HAS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY ROTATE OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.

-FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.

PLAYING COMPACT DISC

zGETTING START

1.SET THE FUNCTION SELECTOR AT “CD” POSITION, OPEN THE CD COMPARTMENT BY PRESSING THE CD DOOR OPEN BUTTON. PUT A CD DISC INTO THE COMPARTMENT AND CLOSE THE CD DOOR.

2.FOCUS SEARCH IS PERFORMING IF DISC IS INSIDE. TOTAL NUMBER OF TRACKS IS READ.

zPLAY / PAUSE MODE

1.IF PLAY/PAUSE BUTTON IS PRESSED DURING STOP MODE, THE FIRST TRACK WILL BE PLAYED AND THE PLAYING TRACK WILL DISPLAY AT THE LED DISPLAY.

2.IF PLAY/PAUSE BUTTON IS PRESSED DURING PLAY MODE, GOTO PAUSE MODE AND THE PAUSE LED INDICATOR WILL FLASHING.

zSTOP MODE

1.IF STOP BUTTON IS PRESSED DURING PLAY OR PAUSE MODE. GO TO STOP MODE AND DISPLAY TOTAL NUMBER OF TRACK ON LED DISPLAY.

zSKIP MODE (SKIP UP/SKIP DOWN)

1.DURING PLAY OR PAUSE MODE, IF SKIP UP BUTTON IS PRESSED IT WILL GO TO NEXT TRACK AND DISPLAY THE TRACK NO. AND THEN CONTINUOU THE PLAY OR PAUSE MODE.

2.DURING PLAY OR PAUSE MODE, IF BACK BUTTON IS PRESSED IT WILL GO BACK TO THE BEGINNING OF THE TRACK, SAME TRACK NO. IS DISPLAY CD AND CONTINUOUS THE PLAY OR PAUSE MODE.

3.AFTER STEP, PRESS BACK BUTTON AGAIN IT WILL GO TO THE PREVIOUS TRACK AND CONTINUOU THE PLAY OR PAUSE MODE.

zREPEAT MODE

PRESS THE REPEAT BUTTON BEFORE OR DURING PLAY, A SINGLE TRACK OR ALL THE TRACKS CAN BE REPEATED. EACH PRESS SWITCH THE REPEAT MODE AS FOLLOW:-

			REPEAT LED
(1) REPEAT 1 (2) REPEAT ALL (3) REPEAT OFF		REPEAT MODE	INDICATOR
		REPEAT 1	FLASHING
	REPEAT ALL		LIGHT UP
		REPEAT OFF	-----------------

CD PROGRAMMING

UP TO 20 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS THE STOP BUTTON.

1.SET IN CD MODE.

2.PRESS THE PROGRAM BUTTON AND THE PROGRAM LED INDICATOR WILL LIGHT UP & FLASHING.

3.SELECT A DESIRED TRACK BY USING THE SKIP BUTTONS.

4.PRESS THE MEMORY BUTTON TO ENTER THE TRACK INTO THE MEMORY.

5.REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.

6.WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE BUTTON TO PLAY THE DISC IN THE ORDER YOU HAVE PROGRAMMED. THE MEMROY LED INDICATOR WILL LIGHT UP AND FLASHING DURING PLAYBACK

7.PRESS STOP BUTTON TO TERMINATE PROGRAM PLAY.

E-2

RCD824 specifications

The Curtis RCD824 is a sophisticated and versatile controller designed for electric vehicles, particularly suited for applications like electric scooters, bikes, and other low-power electric drive systems. This controller has gained recognition for its advanced features, robust performance, and user-friendly interface, making it a popular choice among manufacturers and hobbyists alike.

One of the standout features of the Curtis RCD824 is its regenerative braking capability. This technology allows the controller to capture kinetic energy during braking and feed it back into the battery, enhancing overall energy efficiency. This feature not only extends the range of electric vehicles but also contributes to improved battery life by minimizing the number of charge cycles.

The controller is equipped with advanced programming features, enabling users to customize various parameters such as acceleration profiles, speed limits, and regenerative braking levels. This flexibility allows manufacturers to tailor the performance characteristics of their electric vehicles to meet specific user demands or regulatory requirements. The Curtis RCD824 utilizes a user-friendly programming interface, allowing easy adjustments without extensive technical knowledge.

In terms of connectivity, the Curtis RCD824 supports CAN bus communication, which facilitates seamless integration with other vehicle components and systems. This feature enhances the controller's ability to interact with displays, battery management systems, and other essential electronics, creating a cohesive ecosystem for electric vehicle operation.

The controller is also notable for its robust construction, featuring a rugged and durable design that can withstand the rigors of various operating environments. This reliability is essential for electric vehicles used in diverse conditions, ensuring they perform optimally under stressful situations.

Another significant characteristic of the Curtis RCD824 is its compact form factor. This allows for easier installation in limited spaces commonly found in electric vehicles. Additionally, the controller operates efficiently across a wide range of operating conditions, making it adaptable to different electric vehicle designs and performance requirements.

Furthermore, the Curtis RCD824 incorporates advanced thermal management systems, ensuring optimal operating temperatures are maintained even during extended use. This helps prevent overheating and potential damage to both the controller and the vehicle’s battery system, contributing to safety and reliability.

In summary, the Curtis RCD824 represents a cutting-edge solution for electric vehicle control, combining regenerative braking, customization options, robust connectivity, and durability in a compact package. Its features not only enhance performance but also contribute to the longevity of electric drive systems, making it an excellent choice for both manufacturers and users in the growing electric vehicle market.

Curtis RCD824 Playing Compact Disc, FM & FM-STEREO Reception, Hints for Best Reception

Models: RCD824