Curtis RCD856 manual Operating Instruction, Tuner Operation

OPERATING INSTRUCTION

PHONES (HEADPHONE) JACK

A headphone jack is provided for private listening. To listen to the unit with headphones (not included), set the volume to minimum and insert the 3.5mm mini stereo plug from the headphones into the PHONES jack. The speakers will be disconnected when a plug is inserted in the jack. Adjust the VOLUME control and BASS BOOST button as desired.

MUTE

Press the MUTE button on the remote control to temporarily cut off the sound; the STANDBY/MUTE indicator will blink. Press this button again to restore the sound.

ELECTRONIC ROTARY VOLUME CONTROL

Gently turn clockwise to increase the volume and counterclockwise to decrease the volume.

TO TURN THE UNIT ON AND OFF

Press the POWER button on the main unit or remote control to turn the unit on; the STANDBY/MUTE indicator will go off. Press the POWER button again to turn the unit off; the STANDBY/MUTE indicator will light.

NOTICE: AC POWER 230V~50Hz

FUNCTION SELECTOR SWITCH

Slide the FUNCTION selector switch to select TUNER or CD.

TUNER OPERATION

ANTENNAS

AM- this unit has a built-in ferrite bar antenna, which eliminates the need for an external antenna, and provides adequate reception in most areas. If reception is weak, turn the unit to improve reception.

FM- the FM line antenna on the rear of the unit is for FM reception only. Unwind this antenna completely and orient the wire until you find the position that provides the best reception.

Slide the BAND switch to select, AM, FM, or FM STEREO broadcasts.

TO LISTEN TO THE RADIO