Curtis RCD951 Power Supply Operating the player on AC power, Operation the player on batteries

Power Supply

Operating the player on AC power

Insert one end at the supplied power cord to the AC IN Jack located at the rear

Of the rear of the unit and the other end into the Wall outlet.

NOTE:

WHEN THE FIRST TIME USED THE CORD HAS TO BE FIRMLY PUSHED INTO THE SOCKET IF IT DOES NOT WORK ON AC, TO TRY AGAIN TO BE SURE FOR A POSITIVE CONNECTION.

OPERATION the player on batteries

1.To play your unit on batteries, the AC power cord must be disconnected From the player.

2.Unplug the AC power cord from the unit and insert eight size C/UM-2 Batteries (not provided) in the compartment.

3.Close the battery compartment door.

Note:

Check your batteries regularly. Old or discharged batteries should be replaced. If the unit is not to be used for sometime or is being run exclusively on AC electrical current, remove batteries from the battery compartment to avoid leakage.

WARNING:

Keep batteries away from children and pets. Do not discard batteries in fire, as explosion may occur.

4