Curtis Mathes CM 13102 owner manual Installing your remote control batteries

Installing your remote control batteries

1Open the battery compartment on the back of the remote control.

2Install two AA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly.

3Replace the cover.

Notes

Do not mix different types of batteries, or mix an old and a new battery.

Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly; never throw them into a fire.

Point your remote at the receiver on the center of the front of the TV. Make sure the receiver is not blocked.

The remote control can operate up to 30 feet away from the TV, if you are directly facing the front of the TV. Operating distance diminishes as you move to the sides of the TV.

Chapter 1 : Overview of Your Equipment 7