Curtis Mathes CM 13102 owner manual Changing Channels, Changing the Volume

Changing Channels

You can change channels in three ways:

1The VCHW buttons will take you through all memorized channels,

1	one by one. The VCHW buttons will not access channels that have
2	not been programmed into the TV's memory. For more information
	about programming channels into memory, see the section
3	“Programming your TV's Channel Memory” on the previous page.

2 The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter its number; the TV will tune to the new channel when you enter the second digit of the channel.

3The PREVIOUS button will take you instantly to the last channel you were watching.

Changing the Volume

1To change the volume of the TV set, use the CVOLB buttons on the remote or on the front panel.

1		2 To quickly turn off the sound, press the MUTE button on the remote.
	2	The ‘MUTE’ will appear on screen, colored green. To return the vol-
		ume to its previous level, press MUTE again.

12Chapter 3 : Operating Your TV