Curtis Mathes CMC13410 Connecting Cable TV Systems to the TV/VCR, continued, Installation

Models: CMC13410

1 44
Download 44 pages 48.95 Kb
Page 14
Image 14
Connecting Cable TV Systems to the TV/VCR, continued

INSTALLATION

Connecting Cable TV Systems to the TV/VCR, continued

2Connect one of the coaxial cables between the splitter and the input on the converter box.

3Connect a second coaxial cable between the output of the converter box and the “B” input on the RF (A/B) switch.

4Connect a third coaxial cable between the splitter and the “A” input on the RF (A/B) switch.

5Connect the fourth coaxial cable between the output on the RF (A/B) switch and the terminal on the TV/VCR’s back panel.

Choose the “A” position on the A/B switch to select all non- scrambled channels by remote control. Choose the “B” position on the A/B switch to select scrambled channels via the converter box. When using the “B” position, tune your TV/VCR to the output channel of the converter box (usually channel 3 or 4).

14CHAPTER TWO: INSTALLATION

Page 14
Image 14
Curtis Mathes CMC13410, CMC19410 owner manual Connecting Cable TV Systems to the TV/VCR, continued, Chapter Two Installation