Installing the VoIP Ceiling Speaker 21

Figure 2-11. Reboot System Section

2.Click Reboot. A normal restart will occur as per Section 2.2.2.1, "Status LED".

2.5Restore the Factory Default Settings

When troubleshooting configuration problems, it is sometimes convenient to restore the device to a known state.

Each speaker is delivered with factory set default values for the parameters indicated in Table 2-9. Use the RTFM switch on the speaker face to restore these parameters to the factory default settings.

Note When you use the RTFM switch, the factory default settings are restored for only the parameters indicated in Table 2-9. The other parameters in the current speaker configuration will remain unchanged.

 

Table 2-9. Factory Default Settings

 

 

Parameter

Factory Default Setting

 

 

IP Addressing

static

 

 

IP Address

192.168.3.10

 

 

Web Access Username

admin

 

 

Web Access Password

admin

 

 

Subnet Mask

255.255.255.0

 

 

Operations Guide

930095D

CyberData Corporation