22 Installing the VoIP Ceiling Speaker

 

Table 2-9. Factory Default Settings (continued)

 

 

Parameter

Factory Default Setting

 

 

Default Gateway

192.168.3.1

 

 

To restore these parameters to the factory default settings:

1.Press and hold the RTFM switch for 20 seconds.

2.The speaker will beep after one second. Continue to hold the switch until the speaker beeps again after 20 seconds.

3.Release the switch. The following occurs:

•A voice message announces that the factory default settings are being restored.

•Once the settings are restored, a voice message announces the restored default IP address:

192.168.3.10

•A voice message announces that the speaker is rebooting.

•The speaker reboots.

CyberData Corporation

930095D

Operations Guide