Installing the VoIP Ceiling Speaker 19

Set up the MGROUPS

2. On the MGROUPS Setup page, enter values for the parameters indicated in Table 2-8.

 

Table 2-8. MGROUPS Setup Parameters

 

 

Web Page Item

Description

 

 

Device Name

Displays the device name.

 

 

MG-Emergency

Use MG-Emergency for the MGROUP with the highest

 

priority.

 

 

MG-(1-8)

Use MG-(1-8) to assign MGROUPS 1 through 8.

 

 

MG-Background

Use MG-Background for the MGROUP with the lowest

 

priority (background audio for example).

 

 

Multicast IP Address

Enter the multicast IP Address for this MGROUP.

 

 

Port 2000-65535

Enter the port number for this MGROUP.

 

 

Priority

Assign the priority for this MGROUP (the higher the number,

 

the higher the priority).

 

 

MGROUP Name

Assign a descriptive name for this MGROUP.

 

 

Beep

Check this box if you want a beep to precede a page.

 

 

 

Click this button to save your configuration settings.

 

 

 

Click this button to reboot the system.

 

 

 

Link to the Network Setup page.

 

 

 

Link to the Speaker Setup page.

 

 

 

Link to the SIP Setup page.

 

 

 

Link to the Upgrade Firmware page.

 

 

 

Link to the Home page.

3. After changing the parameters, click Save Settings.

Note For information on how to set up MGROUPS in Cisco Call Manager Express, see Appendix D, “Setting Up MGROUPS in Cisco Call Manager Express”.

Operations Guide

930095K

CyberData Corporation