CyberData Part #010861 2.3.4Configure the SIP Parameters

18Installing the VoIP Loudspeaker Amplifier Configure the Loudspeaker Amplifier Parameters

	Table 2-10. Loudspeaker Amplifier Setup Parameters
Web Page Item	Description
	Click on this button to save your configuration settings.
	Changing a parameter that has an asterisk next to it will
	cause a system reboot when saved.
	Click on this button to do an audio test. Generates a voice
	message for testing the speaker audio quality and volume.
	Link to the Network Setup page.
	Link to the SIP Setup page.
	Link to the MGROUPS Setup page.
	Link to the Upgrade Firmware page.
	Link to the Home Page page.

a.If you select No for RTFM Announcement, you will not hear a beep or associated RTFM audio. However, the return to default settings function remains active. If you wish to return to default settings, hold the RTFM button at least 20 seconds, then release the button.

3.After changing the parameters, click Save Settings.

2.3.4Configure the SIP Parameters

1.Click SIP Setup to open the SIP Setup page (Figure 2-12).

Note For specific server configurations, go to the following URL:

http://www.CyberData.net/support/voip

CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide