
3.9 Select page groups as the page target (see Figure 2).
Figure 2.
4.0 Setting up the Paging Server
To set up the paging server:
4.1If you are connecting the CyberData Paging Server product to CyberData speakers so that you can have more than one paging zone (Figure 3), complete step 1.1 through step 1.13.
4.2Go to the web configuration page for the Paging Server and set it up as a SIP endpoint with the following:
●Username (extension number)
●Password (make sure this matches what you have in step 2.2)
●SIP server address (step 1.5).Multicast address and port number combination
●DTMF two digit tone for each paging zone