CyberPower Mobile Power Pack (CP-MBC) is a rechargeable Power Pack that is designed for powering mobile devices, iPods®, MP3 players, mobile phones, PDAs and portable gaming systems via the USB Mini-B Cable. CP- MBC is an ideal travel mate and backup battery that supports and powers devices on the go.
Features
-Recessed power button prevents accidental start up.
-Auto-shutdown feature protects the CP-MBC from draining.
-High energy-density Lithium-polymer battery.
-Long lasting rechargeable battery with up to 500 cycles.
Package Contents
1.Mobile Power Pack ( CP-MBC)
2.100-240 Volt AC to 5V USB Transformer
3.USB 2.0 Device Cable
4.User Manual
2
Safety Precautions
Before using the CP-MBC, please read the following warnings carefully. Use the product according to the procedures described in this manual. Failure to follow these safety precautions may result in fire, explosion, electrical shock or other dangers.
1.Do not disassemble this product, or any of its parts.
2.Store between -4 to 140°F (-20 to 60°C).Operate between 32 to 113°F(0 to 45°C).
3.Do not immerse this product in water or other liquids, as such use may result in fire or electrical shock. If water or other liquids enter the battery interior, unplug the product immediately from any attached power source or device.
4.Do not use this product with wet hands. Moisture in or on this product may result in electrical shock.
5.Do not expose this product to direct flame or leave it in an over-heated condition, as the battery may explode.
6.Store this product in a cool and dry environment when not in use.
7.Do not puncture this product. Puncturing the battery may cause the release of harmful substances.
8.It is normal for the CP-MBC to become warm during charging.
9.Keep this product out of the reach of children. Ensure that all users read these warnings and instructions before using.
Prior to Use
NOTE: Charge the CP-MBC for a full eight (8) hours prior to using for the first time.
3
Specifications
Item | | Specification | |
DC Input | | |
Input Voltage Range | | 5V | |
Input Power Source | Charge using included AC transformer or | |
| | upstream USB port. | |
DC Output | | |
On Battery Output Voltage Range | | 5V +/-5% | |
On Battery Output Maximum Current | | 1.2A | |
On PC USB Port Maximum Current | | 500mA | |
On AC Adapter Output Maximum Current | | 1A | |
Capacity | | 6 Watt-hours | |
Output Power | 5 Watt Maximum Continuous Power | |
| 6 Watt Peak Power - Short Duration | |
Powering Indication | | Orange LED | |
Capacity Indication | | Green LED | |
Charge time | Recharges to 100% in 3.5 hours | |
Size | | 4.06 x 2.36 x 0.58 in | |
Weight | | 3.264 OZ | |
Environmental | Storage: -4 to 140°F (-20 to 60°C) | 4 |
| Operation: 32 to 113°F(0 to 45°C) |
| |
Product Components | | | |
| Power On/Off | | |
| Press the button momentarily | |
| to turn on or off the unit. | |
| | Green LED | |
| | Charge indicator LED | |
Orange LED | | | |
Power indicator LED | | Mini B Charging Port | |
Power on/off indicator | | Connect the included AC | |
| | transformer or USB cable to | |
Powering Port | charge the battery. | |
Use the included USB cable | |
to power your device. | | |
| | | 5 |
Charging the CP-MBC
You can charge the CP-MBC using any of following methods:
Option 1- Using the AC Power Adapter: Use the included AC power adapter to charge the CP-MBC. Plug the adapter into a wall outlet and connect the Mini- B port to the CP-MBC.
Option 2- Using Your Notebook or PC: Charge the CP-MBC through your notebook or desktop PC. Use the included USB 2.0 Device cable, connect mini-B port to the CP-MBC and connect A-type port to a Notebook or PC.
Option 1. | Option 2. |
mini B Port | mini B Port |
| A Type Connector |
6
The power status of the CP-MBC Power Pack's available power is indicated by the orange LED indicators. The level of available power is described in the following table:
Orange LED Status Indication | Available Power |
Light | 75 ~100% |
Flashing 3 sec | 50 ~75% |
Flashing 2 sec | 25 ~50% |
Flashing Fast | Below 25% |
LED off | Fully Depleted |
Caution
When both orange & green LEDs light up, this indicates that the power consumption of the device is greater than 1.2A current. The CP-MBC is overloaded.
To turn the CP-MBC off, press and hold the power on/off button for 2
Troubleshooting
Problem | Possible Cause | Solution | |
CP-MBC does not | 1. The CP-MBC may | 1. Press the power on/off | |
power the device. | have switched to Auto | button for 1 second to wake | |
| Sleep Mode. | the CP-MBC. | |
| 2. The power of device is | 2. Check the power | |
| over SPEC (5V, 1.2A). | specification of the device | |
| 3. The battery is out of | before charging with the | |
| power. | CP-MBC. | |
| | 3. Charge the CP-MBC | |
| | using one of the two | |
| | methods that are described | |
| | under "Charging the | |
| | CP-MBC" in this user's | |
| | manual. | |
CP-MBC does not | 1. Incorrect connection | 1. Mini B port on the CP- | |
charge. | between charger and | MBC is for charging. | |
| CP- MBC product. | 2. Checking the wall outlet. | |
| 2. No power source from | | |
| outlet. | | |
| | | 10 |
| | |
Radio & Interference Statement
This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant of Part 15 of the FCC rules. The limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee, however, that interference will not occur in a particular installation.
11
Warranty
CyberPower warrants this CP-MBC to be free from defect in material or manufacture for 1 year. If a defect results in product failure during its normal use, CyberPower's sole responsibility is to repair or replace (at its sole option) the CP-MBC.
The foregoing 1 Year Limited Warranty is the consumer's sole and exclusive remedy and excludes any incidental or consequential damages. Some States do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This 1 year limited warranty gives the Consumer specific legal rights and the Consumer may have other rights, which vary from State to State.
To make a 1 year Limited Warranty claim:
1.Pack and ship the CP-MBC with a dated Proof- of-Purchase receipt to CyberPower at 4241 12th Ave E, Suite 400, Shakopee, MN 55379;
2.Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN;
3.Clearly include your name and address on the outside packaging and on a sheet of paper enclosed in the box with the CP-MBC that is being returned.
4.You MUST prepay all shipping costs and you are responsible for packaging and shipment.
CyberPower will inspect and examine the CP-MBC. If the CP-MBC is defective in | |
material or workmanship, CyberPower will repair or replace it and return it to you at | |
CyberPower’s expense at the place you have indicated. | 12 |
|
Reliability. Quality. Value.
CyberPower Systems (USA), Inc.
4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.
TEL: (952) 403-9500 FAX: (952) 403-0009 Toll-Free: (877) 297-6937
E-mail: sales@cyberpowersystems.com Web: www.CPSww.com
Entire contents copyright C 2008 CyberPower Systems, Inc.
All rights reserved. Reproduction in whole or in part without permission is prohibited.
K01-1110000-00