CyberPower Systems CS75A12V3 Specification, Communication Signals, Limited Warranty, FCC Notice

Back Panel

Buzzer On/Off Switch : The default position of the buzzer switch is OFF. If you want to enable this function, there is a button inside the hole, please insert a paper clip or small pointed object into the hole and press the button. In case of utility failure (on battery ), it will emit a long beep. In case of low battery, it will emit a short beep.

/ CS50U48V

INPUT: 100-240V~ 50-60Hz ; 2.0A	OUTPUT: 48V 50W
CAUTION:

FCC CLASS B VERIFIED

LISTED

SPECIFICATION

MODEL	CS75A12V3
AC Input
Input Voltage Range	90Vac - 136Vac
Input Frequency Range	47 - 70 Hz
	North America (NEMA 5-15)
Input Power Cord	3-Prong Power Cord,
	Floating Ground
DC Output
On Battery Output Voltage	12Vdc (boosted to 12.3V as Vout falls below 12V)

CS75A12V3

COMMUNICATION SIGNALS

The communication signals of this unit are isolated from the internal circuitry via open collector opto- coupled transistors. The connection “SIG RTN” (Signal Return) is a common return point for all communication signals. In the typical application, the attached equipment digital ground connects to Signal Return, and pull-up resistors turn the open collector signals into logic levels.

	12V RTN12V RTNSIG BATTERYON BATTEREPLACE MISSIBATTERY BATTERYLOW STARTCOLD 12V XBP	+	CS75A12V3
		-
Utility Power Cord Inlet

Communication signals

CS75A12V3	Message
12V	+ Voltage output
12V RTN	- Voltage output
SIG RTN	Signal return
ON BATTERY	Low when operating from utility line.
	Open when operating from battery.
REPLACE	Low when battery is charged.
BATTERY	Open when battery fails the Self Test.
BATTERY	Low when battery is present.
MISSING	Open when battery is missing.
LOW BATTERY	Low when battery is near full charge capacity.
	Open when operating from a battery with < 20% capacity.

Continuous Power Capability	75W
Output Power Max	75W
Efficiency (at 75% Max Load)	>75%
Battery
Battery Type	Sealed, Maintenance Free Lead-Acid Battery
Numbers of Battery	20AH/12V x 1
Typical Recharge Time	24 Hours @ Maximum Load (5 Hours @ No Load)
Replaceable	Yes
Surge Protection and Filtering
Lightning / Surge Protection	Yes
Warning Diagnostics
Audible Indicator	Utility Failure, Low Battery
LED Indicators	AC, Output, Battery
Management
Auto-Charge	Yes
Communication Interface	On Battery, Replace Battery, Battery Missing, Low Battery
Physical
Maximum Dimensions (L*W*D)	30cm x 28 cm x 9.9 cm
Weights (kg)	8.2
Environment
Operating Temperature	32°F - 104°F (0°C - 40°C)
Operating Humidity	0 - 95% noncondensing within enclosure
Max Operating Elevation	10,000 ft (3,000m)
Max Storage Elevation	50,000 ft (15,000m)
Storage Temperature	5°F - 113°F (-15°C - 45°C)

LIMITED WARRANTY

CyberPower warrants to you, the Initial Purchaser, that the Product will be free from defects in material and workmanship for three years from the date of original purchase, subject to the terms of this Limited Warranty. This Limited Warranty gives you specific rights, and you may have other rights, which vary from State to State or Province to Province.

Any Implied Warranty of Merchantability or for Fitness for a Particular Purpose, if applicable to the Product, is limited in duration to three years. This provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular Purpose that would not otherwise apply to the Product. NOTE: Some States and Provinces do not allow limitations on how long an implied warranty lasts,

so the above limitation may not apply to you.

To be covered you must still be the owner of the Product at the time of the failure that results in the claim made under this Limited Warranty. Your sole and exclusive remedies are those provided by this Limited Warranty. This exclusion of other express warranties applies to written and oral express warranties. CyberPower excludes any liability for personal injury. CyberPower excludes any liability for direct, indirect, special, incidental, or consequential damages, whether for damage to or loss of property, loss of profits, business interruption, information or data. This exclusion applies even though damage or loss is caused by negligence or other fault. NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.

CyberPower does not sell the PRODUCT for use in high-risk activities. The PRODUCT is not designed or intended for use in hazardous environments requiring fail-safe performance, including the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, weapons systems, life support or medical applications or for use in any circumstance in which the failure of the PRODUCT could lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or life support device (collectively, "High Risk Activities").

CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities. CyberPower does not authorize use of any PRODUCT in any High Risk activities.

ANY SUCH USE IS IMPROPER AND IS A MISUSE OF A CYBERPOWER PRODUCT.

The Limited Warranty is governed by the laws of the United States and the State of Minnesota, without reference to conflict of law principles. The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1)Reorient or relocate the receiving antenna.

(2)Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Shielded signal cables must be used with this device to ensure compliance with Class B FCC limits.

CAUTION: Any changes or modifications not expressly approved by Cyber Power could void the authority granted by the FCC to operate this equipment.

For more information, please contact:
CyberPower Systems ( USA ), Inc. 4241 12th Avenue East, Suite 400, Shakopee, MN55379	Phone: (952)403-9500 Fax: (952)403-0009	www.cpsww.com
CyberPower Systems ( EUROPE ), Inc.. Flight Forum 3545, 5657DW Eindhoven, The Netherlands	E-mail: sales@cyberpower-eu.com	eu.cyberpowersystems.com

K01-7512000-00