CyberPower Systems K01-DC48V2A Communication Signals, Specification, Limited Warranty, FCC Notice

Back Panel

Buzzer ON/OFF Switch

OFF ON

Buzzer ON/OFF Switch

OFF ON

	/ CS24U12V-12
INPUT: 100-240V~ 50-60Hz; 0.75A OUTPUT: 12V 24W		/ CS50U48V
CAUTION: RISK OF ELECTRICAL SHOCK. DO NOT		INPUT: 100-240V~ 50-60Hz ; 2.0A OUTPUT: 48V 50W
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.		CAUTION:
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FOR USE IN A CONTROLLED ENVIRONMENT.
REFER TO MANUAL FOR ENVIRONMENTAL CONDITIONS.
US	FCC CLASS B VERIFIED	FCC CLASS B VERIFIED
LISTED
68FG		LISTED
E235457

CS16U48V-8CS50U48V

Buzzer On/Off Switch : The default position of the buzzer switch is OFF. If you want to enable this function, there is a button inside the hole, please insert a paper clip or small pointed object into the hole and press the button. In case of utility failure (on battery ), it will emit a long beep. In case of low battery, it will emit a short beep.

COMMUNICATION SIGNALS

The communication signals of this unit are isolated from the internal circuitry via open collector opto- coupled transistors. The connection “SIG RTN” (Signal Return) is a common return point for all communication signals. In the typical application, the attached equipment digital ground connects to Signal Return, and pull-up resistors turn the open collector signals into logic levels.

CS24U12V	CS50U48V
CS24U12V-12		Message
	CS16U48V-8
CS30U12V-20
12V	48V	+ Voltage output
12V RTN	48V RTN	- Voltage output
SIG RTN	SIG RTN	Signal return
ON BATTERY	ON BATTERY	Low when operating from utility line.
		Open when operating from battery.
REPLACE	REPLACE	Low when battery is charged.
BATTERY	BATTERY	Open when battery fails the Self Test.
BATTERY	BATTERY	Low when battery is present.
MISSING	MISSING	Open when battery is missing.
LOW BATTERY	LOW BATTERY	Low when battery is near full charge
		capacity.
		Open when operating from a battery
		with < 20% capacity.

SPECIFICATION

Model	CS16U48V-8	CS50U48V
Input
Voltage Range	85Vac - 264Vac (Universal Input)
Frequency Range	47 - 70 Hz
Output
On Battery Output Voltage	48Vdc
Continuous Power Capability	16W	50W
Output Power Max	16W	50W
Efficiency (at 75% Max Load)	> 75 %
Battery
Battery Type	Sealed, Maintenance Free Lead-Acid Battery
Numbers of Battery	8AH/12V x 1	20AH/12V x 1
Typical Recharge Time	12Hours	24Hours
Replaceable	Yes
Surge Protection and Filtering
Lightning / Surge Protection	Yes
Warning Diagnostics
Indicators	AC, Output, Battery
Management
Auto-Charge	Yes
Communication Interface	On Battery, Replace Battery, Battery Missing,
	Low Battery
Physical
Maximum Dimensions (L*W*D)	16.7cm x 24cm x 8.1cm	30cm x 28cm x 9.9cm
Weight (kg)	3.28	7.7
Environment
Operating Temperature	32oF - 104oF (0 - 40oC)
Operating Humidity	0 - 95% noncondensing within enclosure
Max Operating Elevation	10,000ft (3,000m)
Max Storage Elevation	50,000ft (15,000m)
Storage Temperature	5oF - 113oF (-15oC - 45oC)

LIMITED WARRANTY

CyberPower warrants to you, the Initial Purchaser, that the Product will be free from defects in material and workmanship for three years from the date of original purchase, subject to the terms of this Limited Warranty. This Limited Warranty gives you specific rights, and you may have other rights, which vary from State to State or Province to Province.

Any Implied Warranty of Merchantability or for Fitness for a Particular Purpose, if applicable to the Product, is limited in duration to three years. This provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular Purpose that would not otherwise apply to the Product. NOTE: Some States and Provinces do not allow limitations on how long an implied warranty lasts,

so the above limitation may not apply to you.

To be covered you must still be the owner of the Product at the time of the failure that results in the claim made under this Limited Warranty. Your sole and exclusive remedies are those provided by this Limited Warranty. This exclusion of other express warranties applies to written and oral express warranties. CyberPower excludes any liability for personal injury. CyberPower excludes any liability for direct, indirect, special, incidental, or consequential damages, whether for damage to or loss of property, loss of profits, business interruption, information or data. This exclusion applies even though damage or loss is caused by negligence or other fault. NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.

CyberPower does not sell the PRODUCT for use in high-risk activities. The PRODUCT is not designed or intended for use in hazardous environments requiring fail-safe performance, including the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, weapons systems, life support or medical applications or for use in any circumstance in which the failure of the PRODUCT could lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or life support device (collectively, "High Risk Activities").

CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities. CyberPower does not authorize use of any PRODUCT in any High Risk activities.

ANY SUCH USE IS IMPROPER AND IS A MISUSE OF A CYBERPOWER PRODUCT.

The Limited Warranty is governed by the laws of the United States and the State of Minnesota, without reference to conflict of law principles. The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1)Reorient or relocate the receiving antenna.

(2)Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Shielded signal cables must be used with this device to ensure compliance with Class B FCC limits.

CAUTION: Any changes or modifications not expressly approved by Cyber Power could void the authority granted by the FCC to operate this equipment.

For more information, please contact:
CyberPower Systems ( USA ), Inc. 5555 12th Avenue East, Suite 110, Shakopee, MN55379	Phone: (952)403-9500 Fax: (952)403-0009	www.cyberpowersystems.com
CyberPower Systems ( EUROPE ), Inc.. Rietwaard 2, 5236 WB, ‘s-Hertogenbosch, Netherlands	E-mail: sales@cyberpower-eu.com	www.cyberpower-eu.com

K01-DC48V2A