![](/images/new-backgrounds/1263185/26318513x1.webp)
UP1200
Guaranteed Uninterruptible Power
System
8.Install the replacement battery by connecting the red wire to the positive (+) terminal of the battery and connecting the black wire to the negative
9.Slide the battery back into the compartment.
10.Replace the cover and the 4 retaining screws.
11.Recharge the unit for 4 – 8 hours to ensure the UPS performs expected runtime.
REMINDER: Batteries are consider HAZARDOUS WASTE and must be disposed of properly. Contact your local government for more information about proper disposal and recycling of batteries.
STORAGE:
First turn off your UPS and disconnect its power cord from the wall outlet. Disconnect all cables connected to the UPS to avoid battery drain. To store your UPS for an extended period, cover it and store with the battery fully charged. Recharge the battery every three months to insure battery life. If the battery remains uncharged for an extended period of time, it may suffer permanent loss of capacity.
7