User’s Manual

Figure 1-7: Connecting the Optional Touchscreen Cable

2.Connect the D-sub 9-pin RS-232 connector end of the PS/2 to RS-232 cable provided with the optional touchscreen package to the 9-pin RS-232 serial port at the back of your PC. Please refer to Figure 1-7.

3.Install the Touchscreen drivers to your PC.

4.Following the Touchscreen driver guide to align your touchscreen positioning.

Power Management System

The LCD monitor complies with the VESA DPMS (version 1.0p) power management proposal. The VESA DPMS proposal provides four phases of power saving modes by detecting the horizontal or vertical sync signal. When the LCD monitor is in power saving mode or detects an incorrect timing, the monitor screen will go blank, and the power LED indicator will start to blink.

10