AlterPath Manager E2000, 2500, 5000 Quick Start Guide
a.The shorter end brackets mount onto the front of the outer rails. Use the two round screw holes in each front end bracket to mount it in a fixed position to its respective outer rail.
b.The longer end brackets mount onto the rear of the outer rails. The long slots in each rear end bracket can be adjusted to fit the bracket and outer rail assembly to the exact length of the rack.
4.Slide the APM 2500 or 5000 into the front of the rack so the inner rails engage into the outer rails.
2.Making the Ethernet Connection
Figure 1: APM E2000 Front View
Figure 2 provides a rear view of the AlterPath Manager E2000 with the ports, the power switch, and the AC power connector. Figure 3 and Figure 4 provide similar information for the APM 2500. Figure 5 and Figure 6 provide similar information for the APM 5000.
USB port 1 | AUX serial port | Power | |
switch | |||
| |||
|
|
Expansion slots | Eth1 Eth0 | Reset | Fan | AC | |
|
|
| Console port |
| |
| USB port 2 |
|
| connector | |
Figure 2: APM E2000 Rear View with Ports, Power Connector, and Power Switch
Press and hold for 1 second to power on the system.
Press and hold for 4 seconds to reset the system.
LCD panel
Press and hold for 10 seconds to shut down the system.
Figure 3: APM 2500 Front View with Control Buttons
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Fan AC USB |
|
| Eth0 Eth1 | ||||
Console | |||||||
| connector |
|
|
| |||
|
|
|
|
|
| ||
Figure 4: APM 2500 Rear View with Ports and Power Connector
2
