Prototyping Modules (CY3210-2xxxx)
PSoC Prototyping Modules are 28-pin PDIP adapters that seamlessly connect any PSoC device package-type to the 28- pin PDIP connector that is default on Cypress PSoC kits. Check the selection tables in the Kit Components and Accessories section of this document for a list of Prototyping Modules offered by Cypress. (Note: Prototyping Modules may sometimes be referred to as Evaluation PODs.)
Prototyping Modules offer quick and easy prototyping of any PSoC device and package on a board with just a 600-mil 28-Pin ZIF socket (included in many of our kits, and easy for a user to acquire and build on their own.)
Prototyping Modules feature:
•28-pin DIP footprint (0.6 in width). Fits in a ZIF socket or breadboard
•ISSP programming header enables programming via ISSP
•Connector for CAT5 cable connection to the ICE-cube
•Port pin-out for 28 pins on bottom of the pod matches port pin- outs for the 28 pin PDIP PSoC
•Pins for emulating parts with >28 pins are accessible via receptacles on top of the prototyping module
Prototyping Modules (CY3210-2xxxx) are not to be confused with Emulation PODs (CY3250-2xxxx), although they also connect to the ICE-Cube (CY3215-DK).
I2C-USB Bridge (CY3240-I2USB)
The main purpose of the I2C -USB Bridge is to test, tune, and debug programs that have an I2C slave interface. This application can also be useful for data acquisition and regulation under PC control. Cypress offers CY3240-I2USB that supports I2C interface and communication to test, debug and tune device designs in many PSoC kits.
There is a table of I2C -USB Bridge kits located in the Appendix.
Bridge 
