D-Link 5635 manual Configuration, Click the Wizard button to continue

ENGLISH

Configuration with Wizard

Configuration

Insert the DCS-5605/5635 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.

1.Click Installation Wizard to begin the installation. Install the Setup Wizard SE and execute the program.

2.The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed. If your network does not use a DHCP server, the camera's default static IP 192.168.0.20 will be displayed.

Click the Wizard button to continue.

3.Enter the Admin ID and password. When logging in for the first time, the default Admin ID is admin with the password left blank.

Click Next to proceed to the next page.

4.Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started.

Click Next to proceed to the next page.

5.Take a moment to confirm your settings and click Restart to reboot the camera.

6 D-Link DCS-5605/5635 Quick Install Guide