D-Link 804HV manual

Restart Your Computer

Connecting Additional Computers To The DI-804HV

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-804HV.

M1 LED – will flash consistently to indicate that the DI-804HV is working properly.

WAN LED – a solid light indicates connection on the WAN port. This LED blinks during data transmission.

COM LED – a solid light indicates a proper connection to a dial-up modem.

POWER LED – a solid light indicates a proper connection to the power supply.

M2 LED – a solid light indicates that Internet connection has been established.

LOCAL NETWORK LEDs – a solid light on the port indicates a connection to an Ethernet enabled computer on ports 1-4. This LED blinks during data transmission.

3