BPS: Select the BPS (Bits per Second). This is the fixed bandwidth rate. Higher the value means better quality video but requires more bandwidth.
JPEG Quality: If you selected JPEG as an encoding option, you can select the quality of the video from this
RTSP URL: This setting allows you to set a suffix for your camera’s RTSP URL, so you can view your camera’s video with this video profile’s settings. For example, if you enter “mpeg4” as your RTSP URL setting and your camera’s IP is 192.160.0.30, you can view your camera’s video with these settings through 192.160.0.20/mpeg4 .
Note: Video Profile 3 is always set to MJPEG as the Encode Type to ensure that at least one of the Video Profiles are viewable by
Enable Speaker: Check to turn on the external speaker. You can use a microphone on your computer to talk through the speaker connected to the camera.
Volume: Change the volume of the external speaker.
Enable Microphone: Checking this box will enable you to listen to audio picked up by the camera’s microphone. This will allow you to hear what is happening near your camera.
Volume: This sets the volume level of the incoming audio.
Note: Higher frame size, frame rate and bit rates will give you better video quality, but they will also require more network bandwidth. For best viewing results on a mobile phone, we suggest setting the frame rate to 5 fps and bit rate to 20 Kbps.
After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes.
Save Settings: Click the Save Settings button to save and activate your settings.
45 |
