D-Link DES-1012 manual Hub Without Uplink MDI-II Port, 100Base-TX Hub

10/100 Fast Ethernet Switch User’s Guide

♦Link/Act indicator is ON.

♦FDX/Col indicator is OFF.

100Base-TX Hub

For a 100Base-TX hub, the Switch LED indicators should illuminate as follows:

♦100M LED speed indicator is ON.

♦Link/Act is ON.

♦FDX/Col LED indicator is OFF.

Hub Without Uplink (MDI-II) Port

If a hub is not equipped with an uplink (MDI-II) port, then a connection can be made using either a straight cable or a crossover cable (see Appendix A, Technical Specifications for cable requirements).

Figure 7, The Switch connected to a Hub without an uplink (MDI-

II) port using the Straight or crossover cable option

Connecting the Switch 15