D-Link DES-802 Port 2 10/100Mbps, N-Way UTP/STP, Port and Cable Specifications, Connector, Duplex

10/100 Fast Ethernet Switch User’s Guide

Port 2: 10/100Mbps, N-Way UTP/STP

Port 2 operates at an user-selectable effective speed of 10 or 100Mbps for half-duplex mode and 20 or 200Mbps for full-duplex mode. It is an N-Way port, so it auto-detects and auto-configures according to the operating standard (10Mbps Ethernet or 100Mbps Fast Ethernet) of connected devices. Port 2 can operate up to 100 meters of Category 3, 4 or 5 shielded twisted- pair or unshielded twisted-pair (STP/UTP) cable. Please use crossover cabling unless you are connecting to a straight-through uplink port on a switch or hub. Port 2 uses an RJ-45 connector.

Table 1 : Port and Cable Specifications

Port	Connector	Half/Full	Cable
		Duplex
2 – 10BASE-T and	RJ-45	10/20Mbps and	100m,
100BASE-TX (N-		100/200 Mbps	Category 5
Way)			UTP/STP
1 – 10BASE-T (and	Combo:	10/20 Mbps	100m,
100BASE-TX, N-	UTP/STP,	(100/200Mbps	Category 3,
Way for UTP/STP	BNC, AUI	and FDX for	4, or 5
ONLY)		UTP/STP	UTP/STP
		ONLY)

Overview 5