DFE-530TX 10/100Mbps Ethernet Adapter for PCI Bus
2
Installation
Installation of a DFE-530TX Ethernet Adapter requires hardware installation first, then software installation.
Unpack and Inspect
CAUTION: Under ordinary circumstances, a DFE-530TX card will not be affected by static charge as may be received through your body during handling of the unit. In special circumstances where you may carry an extraordinarily high static charge, it is good practice to reduce the charge by touching a ground before handling the adapter card.
Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascertain that you have:
∙One DFE-530TX Ethernet Adapter Card.
∙DFE-530TX Software Diskette.
Install the Adapter
1.Shut down the computer, unplug its power cord, and remove the chassis cover.
